Megoldva az initrd hiánya bootoláskor ami miatt nem bootolt a rendszer (üres volt a /boot). Memetest kilett szedve.

releng/airootfs/usr/local/bin/base-install

@@ -111,10 +111,10 @@ if [ -d "/sys/firmware/efi" ]; then
     CPU=$(lscpu | grep "AMD" -c)
     if [[ $CPU -gt 0 ]]; then
         CPU_UCODE="initrd /amd-ucode.img"
-        pacman -S amd-ucode --noconfirm
+	pacman -Rs intel-ucode --noconfirm
     elif [[ $(lscpu | grep "Intel" -c) -gt 0 ]]; then
         CPU_UCODE="initrd /intel-ucode.img"
-        pacman -S intel-ucode --noconfirm
+	pacman -Rs amd-ucode --noconfirm
     else
         CPU_UCODE=""
     fi
@@ -278,8 +278,133 @@ else
     echo "GRUB telepítése sikeres"
 fi
 
+# /boot ellenőrzés és javítás függvény
+check_boot_directory() {
+    echo "A /boot mappa tartalmának ellenőrzése..."
+    
+    # Ellenőrizzük, hogy a /boot mappa tartalmazza-e a szükséges fájlokat
+    if [ -z "$(ls -A /boot)" ] || ! ls /boot/vmlinuz-linux-zen &> /dev/null || ! ls /boot/initramfs-linux-zen.img &> /dev/null; then
+        echo "HIBA: A /boot mappa üres vagy hiányoznak a kernel fájlok!"
+        
+        # Ellenőrizzük, hogy a fájlok léteznek-e a rendszeren
+        if [ -f /usr/lib/modules/*/vmlinuz ]; then
+            echo "Kernel fájl megtalálva, másolás a /boot mappába..."
+            cp /usr/lib/modules/*/vmlinuz /boot/vmlinuz-linux-zen
+        else
+            echo "KRITIKUS HIBA: Kernel fájl nem található a rendszeren!"
+            echo "Próbáljuk telepíteni a linux-zen csomagot..."
+            pacman -S linux-zen --noconfirm
+        fi
+        
+        # Regeneráljuk a initramfs-t, ha szükséges
+        echo "Initramfs újragenerálása..."
+        mkinitcpio -p linux-zen
+        
+        # Ellenőrizzük, hogy a CPU microcode telepítve van-e
+        if [ -f /boot/amd-ucode.img ] || [ -f /boot/intel-ucode.img ]; then
+            echo "CPU microcode már telepítve."
+        else
+            # Ha nincs, akkor telepítsük újra a megfelelőt
+            if [[ $(lscpu | grep "AMD" -c) -gt 0 ]]; then
+                echo "AMD CPU észlelve, microcode telepítése..."
+                pacman -S amd-ucode --noconfirm
+            elif [[ $(lscpu | grep "Intel" -c) -gt 0 ]]; then
+                echo "Intel CPU észlelve, microcode telepítése..."
+                pacman -S intel-ucode --noconfirm
+            fi
+        fi
+        
+        # UEFI esetén próbáljuk újratelepíteni a bootloader-t
+        if [ -d "/sys/firmware/efi" ]; then
+            echo "UEFI rendszer, systemd-boot újratelepítése..."
+            bootctl install
+            
+            # Ellenőrizzük, hogy a kernelt és initramfs-t kimásoltuk-e
+            if [ ! -f /boot/vmlinuz-linux-zen ]; then
+                echo "Kernel másolása a /boot mappába..."
+                find /usr/lib/modules/ -name "vmlinuz*" -exec cp {} /boot/vmlinuz-linux-zen \;
+            fi
+            
+            if [ ! -f /boot/initramfs-linux-zen.img ]; then
+                echo "Initramfs újragenerálása..."
+                mkinitcpio -p linux-zen
+            fi
+            
+            # EFI partíció ellenőrzése
+            EFI_PART=$(findmnt -n -o SOURCE /boot)
+            if [ -z "$EFI_PART" ]; then
+                echo "KRITIKUS HIBA: EFI partíció nem található!"
+                echo "Próbáljuk megkeresni a megfelelő EFI partíciót..."
+                
+                # Keressük az EFI partíciót, ha nincs csatolva
+                EFI_PART=$(lsblk -o NAME,FSTYPE | grep vfat | head -n1 | awk '{print $1}')
+                
+                if [ -n "$EFI_PART" ]; then
+                    echo "EFI partíció található: $EFI_PART, csatolás a /boot könyvtárhoz..."
+                    mount /dev/$EFI_PART /boot
+                    
+                    # Újra próbáljuk a bootloader telepítését
+                    bootctl install
+                    
+                    # A fstab bejegyzést is frissítsük, hogy újraindításkor is megmaradjon
+                    if ! grep -q "/boot" /etc/fstab; then
+                        UUID=$(blkid -s UUID -o value /dev/$EFI_PART)
+                        echo "UUID=$UUID /boot vfat defaults 0 2" >> /etc/fstab
+                    fi
+                fi
+            fi
+        fi
+        
+        # Ellenőrizzük újra, hogy minden szükséges fájl megvan-e
+        if [ -z "$(ls -A /boot)" ] || ! ls /boot/vmlinuz-linux-zen &> /dev/null || ! ls /boot/initramfs-linux-zen.img &> /dev/null; then
+            echo "KRITIKUS HIBA: Nem sikerült helyreállítani a /boot mappát!"
+            return 1
+        else
+            echo "A /boot mappa sikeresen helyreállítva."
+        fi
+    else
+        echo "A /boot mappa rendben van."
+    fi
+    
+    return 0
+}
+
+echo "CPU microcode külön ellenőrzése és telepítése..."
+if [[ $(lscpu | grep "AMD" -c) -gt 0 ]]; then
+    echo "AMD CPU észlelve, microcode telepítése és ellenőrzése..."
+    pacman -S amd-ucode --noconfirm
+    # Ellenőrizzük, hogy az ucode fájl létezik-e a /boot mappában
+    if [ ! -f /boot/amd-ucode.img ]; then
+        echo "amd-ucode.img másolása a /boot mappába..."
+        cp /usr/lib/firmware/amd-ucode.img /boot/ 2>/dev/null || echo "FIGYELEM: Nem sikerült az amd-ucode.img másolása"
+        # Ha nem sikerült másolni, próbáljuk újratelepíteni
+        if [ ! -f /boot/amd-ucode.img ]; then
+            echo "amd-ucode újratelepítése és másolása a /boot mappába..."
+            pacman -S amd-ucode --noconfirm
+            cp /usr/lib/firmware/amd-ucode.img /boot/ 2>/dev/null || echo "HIBA: Nem sikerült az amd-ucode.img másolása"
+        fi
+    fi
+elif [[ $(lscpu | grep "Intel" -c) -gt 0 ]]; then
+    echo "Intel CPU észlelve, microcode telepítése és ellenőrzése..."
+    pacman -S intel-ucode --noconfirm
+    # Ellenőrizzük, hogy az ucode fájl létezik-e a /boot mappában
+    if [ ! -f /boot/intel-ucode.img ]; then
+        echo "intel-ucode.img másolása a /boot mappába..."
+        cp /usr/lib/firmware/intel-ucode.img /boot/ 2>/dev/null || echo "FIGYELEM: Nem sikerült az intel-ucode.img másolása"
+        # Ha nem sikerült másolni, próbáljuk újratelepíteni
+        if [ ! -f /boot/intel-ucode.img ]; then
+            echo "intel-ucode újratelepítése és másolása a /boot mappába..."
+            pacman -S intel-ucode --noconfirm
+            cp /usr/lib/firmware/intel-ucode.img /boot/ 2>/dev/null || echo "HIBA: Nem sikerült az intel-ucode.img másolása"
+        fi
+    fi
+fi
+
+# Hívjuk meg az ellenőrző függvényt a bootloader telepítése után
+check_boot_directory || echo "FIGYELMEZTETÉS: A /boot helyreállítása sikertelen. A rendszer talán nem tud majd elindulni."
+
 # Calamares eltávolítása
 echo "Calamares eltávolítása..."
 pacman -Rs calamares --noconfirm
 
-echo "Telepítés befejezve!"
+echo "Telepítés befejezve!"

releng/airootfs/usr/local/bin/progs/occt.desktop

@@ -0,0 +1,10 @@
+[Desktop Entry]
+Name=OCCT
+GenericName=Core control
+Comment=Control your computer with ease using application profiles
+Exec=/opt/OCCT/OCCT
+Icon=/usr/share/icons/occt-icon.png
+Terminal=false
+Type=Application
+Categories=System;Settings;Utility;
+Keywords=occt

releng/airootfs/usr/share/gnome-shell/extensions/Vitals@CoreCoding.com/extension.js

@@ -25,10 +25,10 @@ var VitalsMenuButton = GObject.registerClass({
 }, class VitalsMenuButton extends PanelMenu.Button {
     _init(extensionObject) {
         super._init(Clutter.ActorAlign.FILL);
-        
+
         this._extensionObject = extensionObject;
         this._settings = extensionObject.getSettings();
-        
+
         this._sensorIcons = {
             'temperature' : { 'icon': 'temperature-symbolic.svg' },
                 'voltage' : { 'icon': 'voltage-symbolic.svg' },
@@ -67,8 +67,7 @@ var VitalsMenuButton = GObject.registerClass({
             x_align: Clutter.ActorAlign.START,
             y_align: Clutter.ActorAlign.CENTER,
             reactive: true,
-            x_expand: true,
+            x_expand: true
-            pack_start: false
         });
 
         this._drawMenu();
@@ -109,7 +108,7 @@ var VitalsMenuButton = GObject.registerClass({
 
             this._initializeMenuGroup(sensor, sensor);
         }
-        
+
         for (let i = 1; i <= this._numGpus; i++)
             this._initializeMenuGroup('gpu#' + i, 'gpu', (this._numGpus > 1 ? ' ' + i : ''));
 
@@ -128,8 +127,7 @@ var VitalsMenuButton = GObject.registerClass({
             x_align: Clutter.ActorAlign.CENTER,
             y_align: Clutter.ActorAlign.CENTER,
             reactive: true,
-            x_expand: true,
+            x_expand: true
-            pack_start: false
         });
 
         // custom round refresh button
@@ -255,7 +253,7 @@ var VitalsMenuButton = GObject.registerClass({
             }
         );
     }
-    
+
     _createHotItem(key, value) {
         let icon = this._defaultIcon(key);
         this._hotIcons[key] = icon;
@@ -291,7 +289,7 @@ var VitalsMenuButton = GObject.registerClass({
         if(sensorName === 'gpu') {
             for(let i = 1; i <= this._numGpus; i++)
                 this._groups[sensorName + '#' + i].visible = this._settings.get_boolean(sensor);
-        } else 
+        } else
             this._groups[sensorName].visible = this._settings.get_boolean(sensor);
     }
 
@@ -417,8 +415,7 @@ var VitalsMenuButton = GObject.registerClass({
                 }
             }
         }
-        if(key === "_gpu#1_domain_number_")
+
-            console.error('UPDATING: ', key);
         // have we added this sensor before?
         let item = this._sensorMenuItems[key];
         if (item) {
@@ -565,9 +562,8 @@ var VitalsMenuButton = GObject.registerClass({
                 arrow_pos = 0;
                 break;
         }
-        
+
         let centered = this._settings.get_boolean('menu-centered')
-        
         if (centered) arrow_pos = 0.5;
 
         // set arrow position when initializing and moving vitals
@@ -605,7 +601,7 @@ var VitalsMenuButton = GObject.registerClass({
                         this._newGpuDetected = true;
                         return;
                     }
-                    
+
                     this._numGpus = parseInt(split[1]);
                     this._newGpuDetectedCount = 0;
                     this._newGpuDetected = false;

releng/airootfs/usr/share/gnome-shell/extensions/Vitals@CoreCoding.com/icons/gnome/network-download-symbolic.svg

@@ -1 +1,2 @@
-<svg xmlns="http://www.w3.org/2000/svg" width="16" height="16"><g fill="#222"><path fill-opacity=".349" d="M12 1a1 1 0 0 1 .707.293l3 3a1 1 0 0 1 0 1.414l-3 3a1 1 0 1 1-1.414-1.414L12.586 6H5c-.55 0-1-.45-1-1s.45-1 1-1h7.586l-1.293-1.293A1 1 0 0 1 12 1m0 0"/><path d="M4 15a1 1 0 0 1-.707-.293l-3-3a1 1 0 0 1 0-1.414l3-3a1 1 0 1 1 1.414 1.414L3.414 10H11c.55 0 1 .45 1 1s-.45 1-1 1H3.414l1.293 1.293A1 1 0 0 1 4 15m0 0"/></g></svg>
+<?xml version="1.0" encoding="UTF-8"?>
+<svg xmlns="http://www.w3.org/2000/svg" height="16px" viewBox="0 0 16 16" width="16px"><g fill="#222222" fill-rule="evenodd"><path d="m 1 3.914062 c 0.003906 -0.257812 0.105469 -0.511718 0.304688 -0.703124 l 3 -2.917969 c 0.386718 -0.3789065 1.003906 -0.3789065 1.394531 0 l 3 2.917969 c 0.394531 0.382812 0.402343 1.015624 0.019531 1.414062 c -0.386719 0.394531 -1.019531 0.402344 -1.417969 0.015625 l -1.300781 -1.265625 v 6.550781 c 0 1.332031 -2 1.332031 -2 0 v -6.550781 l -1.300781 1.269531 c -0.398438 0.382813 -1.03125 0.375 -1.414063 -0.019531 c -0.195312 -0.199219 -0.289062 -0.457031 -0.285156 -0.710938 z m 0 0" fill-opacity="0.34902"/><path d="m 7 11.941406 c 0.003906 0.253906 0.105469 0.507813 0.304688 0.703125 l 3 2.917969 c 0.386718 0.375 1.003906 0.375 1.394531 0 l 3 -2.917969 c 0.394531 -0.386719 0.402343 -1.019531 0.019531 -1.414062 c -0.386719 -0.398438 -1.019531 -0.40625 -1.417969 -0.019531 l -1.300781 1.265624 v -6.550781 c 0 -1.332031 -2 -1.332031 -2 0 v 6.550781 l -1.300781 -1.265624 c -0.398438 -0.386719 -1.03125 -0.378907 -1.414063 0.015624 c -0.195312 0.199219 -0.289062 0.457032 -0.285156 0.710938 z m 0 0"/></g></svg>

releng/airootfs/usr/share/gnome-shell/extensions/Vitals@CoreCoding.com/icons/gnome/network-symbolic.svg

@@ -1 +1,2 @@
-<svg xmlns="http://www.w3.org/2000/svg" width="16" height="16"><path fill="#222" d="M12 1a1 1 0 0 0-.707 1.707L12.586 4H5c-.55 0-1 .45-1 1s.45 1 1 1h7.586l-1.293 1.293a1 1 0 1 0 1.414 1.414l3-3a1 1 0 0 0 0-1.414l-3-3A1 1 0 0 0 12 1M4 7a1 1 0 0 0-.707.293l-3 3a1 1 0 0 0 0 1.414l3 3a1 1 0 1 0 1.414-1.414L3.414 12H11c.55 0 1-.45 1-1s-.45-1-1-1H3.414l1.293-1.293A1 1 0 0 0 4 7m0 0"/></svg>
+<?xml version="1.0" encoding="UTF-8"?>
+<svg xmlns="http://www.w3.org/2000/svg" height="16px" viewBox="0 0 16 16" width="16px"><g fill="#222222" fill-rule="evenodd"><path d="m 1 3.914062 c 0.003906 -0.257812 0.105469 -0.511718 0.304688 -0.703124 l 3 -2.917969 c 0.386718 -0.3789065 1.003906 -0.3789065 1.394531 0 l 3 2.917969 c 0.394531 0.382812 0.402343 1.015624 0.019531 1.414062 c -0.386719 0.394531 -1.019531 0.402344 -1.417969 0.015625 l -1.300781 -1.265625 v 6.550781 c 0 1.332031 -2 1.332031 -2 0 v -6.550781 l -1.300781 1.269531 c -0.398438 0.382813 -1.03125 0.375 -1.414063 -0.019531 c -0.195312 -0.199219 -0.289062 -0.457031 -0.285156 -0.710938 z m 0 0"/><path d="m 7 11.941406 c 0.003906 0.253906 0.105469 0.507813 0.304688 0.703125 l 3 2.917969 c 0.386718 0.375 1.003906 0.375 1.394531 0 l 3 -2.917969 c 0.394531 -0.386719 0.402343 -1.019531 0.019531 -1.414062 c -0.386719 -0.398438 -1.019531 -0.40625 -1.417969 -0.019531 l -1.300781 1.265624 v -6.550781 c 0 -1.332031 -2 -1.332031 -2 0 v 6.550781 l -1.300781 -1.265624 c -0.398438 -0.386719 -1.03125 -0.378907 -1.414063 0.015624 c -0.195312 0.199219 -0.289062 0.457032 -0.285156 0.710938 z m 0 0"/></g></svg>

releng/airootfs/usr/share/gnome-shell/extensions/Vitals@CoreCoding.com/icons/gnome/network-upload-symbolic.svg

@@ -1 +1,2 @@
-<svg xmlns="http://www.w3.org/2000/svg" width="16" height="16"><g fill="#222"><path d="M12 1a1 1 0 0 1 .707.293l3 3a1 1 0 0 1 0 1.414l-3 3a1 1 0 1 1-1.414-1.414L12.586 6H5c-.55 0-1-.45-1-1s.45-1 1-1h7.586l-1.293-1.293A1 1 0 0 1 12 1m0 0"/><path fill-opacity=".349" d="M4 15a1 1 0 0 1-.707-.293l-3-3a1 1 0 0 1 0-1.414l3-3a1 1 0 1 1 1.414 1.414L3.414 10H11c.55 0 1 .45 1 1s-.45 1-1 1H3.414l1.293 1.293A1 1 0 0 1 4 15m0 0"/></g></svg>
+<?xml version="1.0" encoding="UTF-8"?>
+<svg xmlns="http://www.w3.org/2000/svg" height="16px" viewBox="0 0 16 16" width="16px"><g fill="#222222" fill-rule="evenodd"><path d="m 1 3.914062 c 0.003906 -0.257812 0.105469 -0.511718 0.304688 -0.703124 l 3 -2.917969 c 0.386718 -0.3789065 1.003906 -0.3789065 1.394531 0 l 3 2.917969 c 0.394531 0.382812 0.402343 1.015624 0.019531 1.414062 c -0.386719 0.394531 -1.019531 0.402344 -1.417969 0.015625 l -1.300781 -1.265625 v 6.550781 c 0 1.332031 -2 1.332031 -2 0 v -6.550781 l -1.300781 1.269531 c -0.398438 0.382813 -1.03125 0.375 -1.414063 -0.019531 c -0.195312 -0.199219 -0.289062 -0.457031 -0.285156 -0.710938 z m 0 0"/><path d="m 7 11.941406 c 0.003906 0.253906 0.105469 0.507813 0.304688 0.703125 l 3 2.917969 c 0.386718 0.375 1.003906 0.375 1.394531 0 l 3 -2.917969 c 0.394531 -0.386719 0.402343 -1.019531 0.019531 -1.414062 c -0.386719 -0.398438 -1.019531 -0.40625 -1.417969 -0.019531 l -1.300781 1.265624 v -6.550781 c 0 -1.332031 -2 -1.332031 -2 0 v 6.550781 l -1.300781 -1.265624 c -0.398438 -0.386719 -1.03125 -0.378907 -1.414063 0.015624 c -0.195312 0.199219 -0.289062 0.457032 -0.285156 0.710938 z m 0 0" fill-opacity="0.34902"/></g></svg>

releng/airootfs/usr/share/gnome-shell/extensions/Vitals@CoreCoding.com/metadata.json

@@ -10,9 +10,10 @@
   "shell-version": [
     "45",
     "46",
-    "47"
+    "47",
+    "48"
   ],
   "url": "https://github.com/corecoding/Vitals",
   "uuid": "Vitals@CoreCoding.com",
-  "version": 69
+  "version": 71
 }

releng/airootfs/usr/share/gnome-shell/extensions/Vitals@CoreCoding.com/prefs.ui

@@ -898,7 +898,7 @@
                                 <property name="halign">start</property>
                                 <property name="margin-start">5</property>
                                 <property name="margin-end">5</property>
-                                <property name="label" translatable="yes">Monitor gpu (beta; NVIDIA only)</property>
+                                <property name="label" translatable="yes">Monitor GPU (beta)</property>
                               </object>
                             </child>
                             <child>
@@ -1224,6 +1224,8 @@
                           <item translatable="yes">BAT2</item>
                           <item translatable="yes">BATT</item>
                           <item translatable="yes">CMB0</item>
+                          <item translatable="yes">CMB1</item>
+                          <item translatable="yes">CMB2</item>
                           <item translatable="yes">macsmc-battery</item>
                         </items>
                       </object>

releng/airootfs/usr/share/gnome-shell/extensions/Vitals@CoreCoding.com/sensors.js

@@ -54,6 +54,8 @@ export const Sensors = GObject.registerClass({
         this._addSettingChangedSignal('update-time', this._reconfigureNvidiaSmiProcess.bind(this));
         //this._addSettingChangedSignal('include-static-gpu-info', this._reconfigureNvidiaSmiProcess.bind(this));
 
+        this._gpu_drm_vendors = null;
+        this._gpu_drm_indices = null;
         this._nvidia_smi_process = null;
         this._nvidia_labels = [];
         this._bad_split_count = 0;
@@ -74,7 +76,7 @@ export const Sensors = GObject.registerClass({
 
     _refreshIPAddress(callback) {
         // check IP address
-        new FileModule.File('https://corecoding.com/vitals.php').read().then(contents => {
+        new FileModule.File('https://ipv4.corecoding.com').read().then(contents => {
             let obj = JSON.parse(contents);
             this._returnValue(callback, 'Public IP', obj['IPv4'], 'network', 'string');
         }).catch(err => { });
@@ -375,20 +377,20 @@ export const Sensors = GObject.registerClass({
     _queryBattery(callback) {
         let battery_slot = this._settings.get_int('battery-slot');
 
-        // addresses issue #161
+        // create a mapping of indices to battery paths (from prefs.ui)
-        let battery_key = 'BAT'; // BAT0, BAT1 and BAT2
+        const BATTERY_PATHS = {
-        if (battery_slot == 3) {
+            0: 'BAT0',
-            battery_slot = 'T';
+            1: 'BAT1',
-        } else if (battery_slot == 4) {
+            2: 'BAT2',
-            battery_key = 'CMB'; // CMB0
+            3: 'BATT',
-            battery_slot = 0;
+            4: 'CMB0',
-        } else if (battery_slot == 5) {
+            5: 'CMB1',
-            battery_key = 'macsmc-battery'; // supports Asahi linux
+            6: 'CMB2',
-            battery_slot = '';
+            7: 'macsmc-battery'
-        }
+        };
 
         // uevent has all necessary fields, no need to read individual files
-        let battery_path = '/sys/class/power_supply/' + battery_key + battery_slot + '/uevent';
+        let battery_path = '/sys/class/power_supply/' + BATTERY_PATHS[battery_slot] + '/uevent';
         new FileModule.File(battery_path).read("\n").then(lines => {
             let output = {};
             for (let line of lines) {
@@ -496,10 +498,16 @@ export const Sensors = GObject.registerClass({
 
     _queryGpu(callback) {
         if (!this._nvidia_smi_process) {
-            this._disableGpuLabels(callback);
+            // no nvidia-smi, so we use sysfs DRM if any cards was discovered
-            return;
+            if (!this._gpu_drm_indices){
+                this._disableGpuLabels(callback);
+                return;
+            } else {
+                this._readGpuDrm(callback);
+                return;
+            }
         }
-        
+
         this._nvidia_smi_process.read('\n').then(lines => {
             /// for debugging multi-gpu on systems with only one gpu
             /// duplicates the first gpu's data 3 times, for 4 total gpus
@@ -510,10 +518,9 @@ export const Sensors = GObject.registerClass({
             for (let i = 0; i < lines.length; i++) {
                 this._parseNvidiaSmiLine(callback, lines[i], i + 1, lines.length > 1);
             }
-            
 
-            // if we've already updated the static info during the last parse, then stop doing so. 
+            // if we've already updated the static info during the last parse, then stop doing so.
-            // this is so the _parseNvidiaSmiLine function won't return static info anymore 
+            // this is so the _parseNvidiaSmiLine function won't return static info anymore
             // and the nvidia-smi commmand won't be queried for static info either
             if(!this._nvidia_static_returned) {
                 this._nvidia_static_returned = true;
@@ -544,13 +551,13 @@ export const Sensors = GObject.registerClass({
         this._bad_split_count = 0;
 
         let [
-            label, 
+            label,
             fan_speed_pct,
-            temp_gpu, temp_mem, 
+            temp_gpu, temp_mem,
             mem_total, mem_used, mem_reserved, mem_free,
             util_gpu, util_mem, util_encoder, util_decoder,
             clock_gpu, clock_mem, clock_encode_decode,
-            power, power_avg, 
+            power, power_avg,
             link_gen_current, link_width_current
         ] = csv_split;
 
@@ -572,12 +579,9 @@ export const Sensors = GObject.registerClass({
             }
         }
 
-
         const typeName = 'gpu#' + gpuNum;
         const globalLabel = 'GPU' + (multiGpu ? ' ' + gpuNum : '');
-        
         const memTempValid = !isNaN(parseInt(temp_mem));
-        
 
         this._returnGpuValue(callback, 'Graphics', parseInt(util_gpu) * 0.01, typeName + '-group', 'percent');
 
@@ -628,6 +632,50 @@ export const Sensors = GObject.registerClass({
         this._returnStaticGpuValue(callback, 'Sub Device ID', staticInfo['sub_device_id'], typeName, 'string');
     }
 
+    _readGpuDrm(callback){
+        const multiGpu = this._gpu_drm_indices.length > 1;
+        const unit = this._settings.get_int('memory-measurement') ? 1000 : 1024;
+        for (let z = 0; z < this._gpu_drm_indices.length; z++ ) {
+            let i = this._gpu_drm_indices[z];
+            const typeName = 'gpu#' + i;
+            const vendor = this._gpu_drm_vendors[z];
+
+            // AMD
+            if(vendor === "0x1002") {
+                // read GPU usage and create group lebel for card
+                new FileModule.File('/sys/class/drm/card'+i+'/device/gpu_busy_percent').read().then(value => {
+                    // create group 
+                    this._returnGpuValue(callback, 'Graphics', parseInt(value) * 0.01, typeName + '-group', 'percent');
+                    this._returnGpuValue(callback, 'Vendor', "AMD", typeName, 'string');
+                    this._returnGpuValue(callback, 'Usage', parseInt(value) * 0.01, typeName, 'percent');
+                }).catch(err => {
+                    // nothing to do, keep old value displayed
+                });
+                new FileModule.File('/sys/class/drm/card'+i+'/device/mem_info_vram_used').read().then(value => {
+                    this._returnGpuValue(callback, 'Memory Used', parseInt(value) / unit, typeName, 'memory');
+                }).catch(err => {
+                    // nothing to do, keep old value displayed
+                });
+                new FileModule.File('/sys/class/drm/card'+i+'/device/mem_info_vram_total').read().then(value => {
+                    this._returnGpuValue(callback, 'Memory Total', parseInt(value) / unit, typeName, 'memory');
+                }).catch(err => {
+                    // nothing to do, keep old value displayed
+                });
+            } else {
+                // for other vendors only show basic card info
+                let vendorName = null;
+                switch (vendor){
+                    case '0x10DE': vendorName = 'NVIDIA'; break; // should be never used as nvidia-smi should be preferred
+                    case '0x13B5': vendorName = 'ARM'; break;
+                    case '0x5143': vendorName = 'Qualcomm'; break;
+                    case '0x8086': vendorName = 'Intel'; break;
+                    default: vendorName = "Unknown " + vendor;
+                }
+                this._returnGpuValue(callback, 'Graphics', vendorName, typeName + '-group', 'string');
+            }
+        }
+    }
+
     _disableGpuLabels(callback) {
         for (let labelObj of this._nvidia_labels)
             this._returnValue(callback, labelObj.label, 'disabled', labelObj.type, labelObj.format);
@@ -635,7 +683,7 @@ export const Sensors = GObject.registerClass({
 
     _returnStaticGpuValue(callback, label, value, type, format) {
         //if we've already tried to return existing static info before or if the option isn't enabled, then do nothing.
-        if (this._nvidia_static_returned || !this._settings.get_boolean('include-static-gpu-info')) 
+        if (this._nvidia_static_returned || !this._settings.get_boolean('include-static-gpu-info'))
             return;
 
         //we don't need to disable static info labels, so just use ordinary returnValue function
@@ -645,7 +693,7 @@ export const Sensors = GObject.registerClass({
     _returnGpuValue(callback, label, value, type, format, display = true) {
         if(!display) return;
 
-        if(value === 'N/A' || value === '[N/A]' || isNaN(value)) return;
+        if(format !== "string" && (value === 'N/A' || value === '[N/A]' || isNaN(value))) return;
 
         let nvidiaLabel = {'label': label, 'type': type, 'format': format};
         if (!this._nvidia_labels.includes(nvidiaLabel))
@@ -748,6 +796,27 @@ export const Sensors = GObject.registerClass({
 
         // Launch nvidia-smi subprocess if nvidia querying is enabled
         this._reconfigureNvidiaSmiProcess();
+        this._discoverGpuDrm();
+    }
+
+    _discoverGpuDrm() {
+        // use DRM only if nvidia-smi is not used
+        if (this._settings.get_boolean('show-gpu') && this._nvidia_smi_process == null) {
+            // try to discover up to 10 cards starting from index 0
+            for(let i = 0; i < 10 ; i++){
+                new FileModule.File('/sys/class/drm/card'+i+'/device/vendor').read().then(value => {
+                    if(!this._gpu_drm_indices){
+                        this._gpu_drm_indices = [];
+                        this._gpu_drm_vendors = [];
+                    }
+                    this._gpu_drm_indices.push(i);
+                    this._gpu_drm_vendors.push(value);
+                }).catch(err => { });
+            }
+        } else {
+            this._gpu_drm_vendors = null;
+            this._gpu_drm_indices = null;
+        }
     }
 
     // The nvidia-smi subprocess will keep running and print new sensor data to stdout every
@@ -772,7 +841,7 @@ export const Sensors = GObject.registerClass({
     _reconfigureNvidiaSmiProcess() {
         if (this._settings.get_boolean('show-gpu')) {
             this._terminateNvidiaSmiProcess();
-            
+
             try {
                 let update_time = this._settings.get_int('update-time');
                 let query_interval = Math.max(update_time, 1);
@@ -786,13 +855,13 @@ export const Sensors = GObject.registerClass({
                     'clocks.gr,clocks.mem,clocks.video,' +
                     'power.draw.instant,power.draw.average,' +
                     'pcie.link.gen.gpucurrent,pcie.link.width.current,' +
-                    (!this._nvidia_static_returned && this._settings.get_boolean('include-static-gpu-info') ? 
+                    (!this._nvidia_static_returned && this._settings.get_boolean('include-static-gpu-info') ?
                         'temperature.gpu.tlimit,' +
                         'power.limit,' +
                         'pcie.link.gen.max,pcie.link.width.max,'   +
                         'addressing_mode,'+
                         'driver_version,vbios_version,serial,' +
-                        'pci.domain,pci.bus,pci.device,pci.device_id,pci.sub_device_id,' 
+                        'pci.domain,pci.bus,pci.device,pci.device_id,pci.sub_device_id,'
                     : ''),
                     '--format=csv,noheader,nounits',
                     '-l', query_interval.toString()

releng/airootfs/usr/share/gnome-shell/extensions/appindicatorsupport@rgcjonas.gmail.com/metadata.json

@@ -7,9 +7,10 @@
   "shell-version": [
     "45",
     "46",
-    "47"
+    "47",
+    "48"
   ],
   "url": "https://github.com/ubuntu/gnome-shell-extension-appindicator",
   "uuid": "appindicatorsupport@rgcjonas.gmail.com",
   "version": 59
-}
+}

releng/airootfs/usr/share/gnome-shell/extensions/blur-my-shell@aunetx/LICENSE

@@ -0,0 +1,674 @@
+                    GNU GENERAL PUBLIC LICENSE
+                       Version 3, 29 June 2007
+
+ Copyright (C) 2007 Free Software Foundation, Inc. <https://fsf.org/>
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+                            Preamble
+
+  The GNU General Public License is a free, copyleft license for
+software and other kinds of works.
+
+  The licenses for most software and other practical works are designed
+to take away your freedom to share and change the works.  By contrast,
+the GNU General Public License is intended to guarantee your freedom to
+share and change all versions of a program--to make sure it remains free
+software for all its users.  We, the Free Software Foundation, use the
+GNU General Public License for most of our software; it applies also to
+any other work released this way by its authors.  You can apply it to
+your programs, too.
+
+  When we speak of free software, we are referring to freedom, not
+price.  Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+them if you wish), that you receive source code or can get it if you
+want it, that you can change the software or use pieces of it in new
+free programs, and that you know you can do these things.
+
+  To protect your rights, we need to prevent others from denying you
+these rights or asking you to surrender the rights.  Therefore, you have
+certain responsibilities if you distribute copies of the software, or if
+you modify it: responsibilities to respect the freedom of others.
+
+  For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must pass on to the recipients the same
+freedoms that you received.  You must make sure that they, too, receive
+or can get the source code.  And you must show them these terms so they
+know their rights.
+
+  Developers that use the GNU GPL protect your rights with two steps:
+(1) assert copyright on the software, and (2) offer you this License
+giving you legal permission to copy, distribute and/or modify it.
+
+  For the developers' and authors' protection, the GPL clearly explains
+that there is no warranty for this free software.  For both users' and
+authors' sake, the GPL requires that modified versions be marked as
+changed, so that their problems will not be attributed erroneously to
+authors of previous versions.
+
+  Some devices are designed to deny users access to install or run
+modified versions of the software inside them, although the manufacturer
+can do so.  This is fundamentally incompatible with the aim of
+protecting users' freedom to change the software.  The systematic
+pattern of such abuse occurs in the area of products for individuals to
+use, which is precisely where it is most unacceptable.  Therefore, we
+have designed this version of the GPL to prohibit the practice for those
+products.  If such problems arise substantially in other domains, we
+stand ready to extend this provision to those domains in future versions
+of the GPL, as needed to protect the freedom of users.
+
+  Finally, every program is threatened constantly by software patents.
+States should not allow patents to restrict development and use of
+software on general-purpose computers, but in those that do, we wish to
+avoid the special danger that patents applied to a free program could
+make it effectively proprietary.  To prevent this, the GPL assures that
+patents cannot be used to render the program non-free.
+
+  The precise terms and conditions for copying, distribution and
+modification follow.
+
+                       TERMS AND CONDITIONS
+
+  0. Definitions.
+
+  "This License" refers to version 3 of the GNU General Public License.
+
+  "Copyright" also means copyright-like laws that apply to other kinds of
+works, such as semiconductor masks.
+
+  "The Program" refers to any copyrightable work licensed under this
+License.  Each licensee is addressed as "you".  "Licensees" and
+"recipients" may be individuals or organizations.
+
+  To "modify" a work means to copy from or adapt all or part of the work
+in a fashion requiring copyright permission, other than the making of an
+exact copy.  The resulting work is called a "modified version" of the
+earlier work or a work "based on" the earlier work.
+
+  A "covered work" means either the unmodified Program or a work based
+on the Program.
+
+  To "propagate" a work means to do anything with it that, without
+permission, would make you directly or secondarily liable for
+infringement under applicable copyright law, except executing it on a
+computer or modifying a private copy.  Propagation includes copying,
+distribution (with or without modification), making available to the
+public, and in some countries other activities as well.
+
+  To "convey" a work means any kind of propagation that enables other
+parties to make or receive copies.  Mere interaction with a user through
+a computer network, with no transfer of a copy, is not conveying.
+
+  An interactive user interface displays "Appropriate Legal Notices"
+to the extent that it includes a convenient and prominently visible
+feature that (1) displays an appropriate copyright notice, and (2)
+tells the user that there is no warranty for the work (except to the
+extent that warranties are provided), that licensees may convey the
+work under this License, and how to view a copy of this License.  If
+the interface presents a list of user commands or options, such as a
+menu, a prominent item in the list meets this criterion.
+
+  1. Source Code.
+
+  The "source code" for a work means the preferred form of the work
+for making modifications to it.  "Object code" means any non-source
+form of a work.
+
+  A "Standard Interface" means an interface that either is an official
+standard defined by a recognized standards body, or, in the case of
+interfaces specified for a particular programming language, one that
+is widely used among developers working in that language.
+
+  The "System Libraries" of an executable work include anything, other
+than the work as a whole, that (a) is included in the normal form of
+packaging a Major Component, but which is not part of that Major
+Component, and (b) serves only to enable use of the work with that
+Major Component, or to implement a Standard Interface for which an
+implementation is available to the public in source code form.  A
+"Major Component", in this context, means a major essential component
+(kernel, window system, and so on) of the specific operating system
+(if any) on which the executable work runs, or a compiler used to
+produce the work, or an object code interpreter used to run it.
+
+  The "Corresponding Source" for a work in object code form means all
+the source code needed to generate, install, and (for an executable
+work) run the object code and to modify the work, including scripts to
+control those activities.  However, it does not include the work's
+System Libraries, or general-purpose tools or generally available free
+programs which are used unmodified in performing those activities but
+which are not part of the work.  For example, Corresponding Source
+includes interface definition files associated with source files for
+the work, and the source code for shared libraries and dynamically
+linked subprograms that the work is specifically designed to require,
+such as by intimate data communication or control flow between those
+subprograms and other parts of the work.
+
+  The Corresponding Source need not include anything that users
+can regenerate automatically from other parts of the Corresponding
+Source.
+
+  The Corresponding Source for a work in source code form is that
+same work.
+
+  2. Basic Permissions.
+
+  All rights granted under this License are granted for the term of
+copyright on the Program, and are irrevocable provided the stated
+conditions are met.  This License explicitly affirms your unlimited
+permission to run the unmodified Program.  The output from running a
+covered work is covered by this License only if the output, given its
+content, constitutes a covered work.  This License acknowledges your
+rights of fair use or other equivalent, as provided by copyright law.
+
+  You may make, run and propagate covered works that you do not
+convey, without conditions so long as your license otherwise remains
+in force.  You may convey covered works to others for the sole purpose
+of having them make modifications exclusively for you, or provide you
+with facilities for running those works, provided that you comply with
+the terms of this License in conveying all material for which you do
+not control copyright.  Those thus making or running the covered works
+for you must do so exclusively on your behalf, under your direction
+and control, on terms that prohibit them from making any copies of
+your copyrighted material outside their relationship with you.
+
+  Conveying under any other circumstances is permitted solely under
+the conditions stated below.  Sublicensing is not allowed; section 10
+makes it unnecessary.
+
+  3. Protecting Users' Legal Rights From Anti-Circumvention Law.
+
+  No covered work shall be deemed part of an effective technological
+measure under any applicable law fulfilling obligations under article
+11 of the WIPO copyright treaty adopted on 20 December 1996, or
+similar laws prohibiting or restricting circumvention of such
+measures.
+
+  When you convey a covered work, you waive any legal power to forbid
+circumvention of technological measures to the extent such circumvention
+is effected by exercising rights under this License with respect to
+the covered work, and you disclaim any intention to limit operation or
+modification of the work as a means of enforcing, against the work's
+users, your or third parties' legal rights to forbid circumvention of
+technological measures.
+
+  4. Conveying Verbatim Copies.
+
+  You may convey verbatim copies of the Program's source code as you
+receive it, in any medium, provided that you conspicuously and
+appropriately publish on each copy an appropriate copyright notice;
+keep intact all notices stating that this License and any
+non-permissive terms added in accord with section 7 apply to the code;
+keep intact all notices of the absence of any warranty; and give all
+recipients a copy of this License along with the Program.
+
+  You may charge any price or no price for each copy that you convey,
+and you may offer support or warranty protection for a fee.
+
+  5. Conveying Modified Source Versions.
+
+  You may convey a work based on the Program, or the modifications to
+produce it from the Program, in the form of source code under the
+terms of section 4, provided that you also meet all of these conditions:
+
+    a) The work must carry prominent notices stating that you modified
+    it, and giving a relevant date.
+
+    b) The work must carry prominent notices stating that it is
+    released under this License and any conditions added under section
+    7.  This requirement modifies the requirement in section 4 to
+    "keep intact all notices".
+
+    c) You must license the entire work, as a whole, under this
+    License to anyone who comes into possession of a copy.  This
+    License will therefore apply, along with any applicable section 7
+    additional terms, to the whole of the work, and all its parts,
+    regardless of how they are packaged.  This License gives no
+    permission to license the work in any other way, but it does not
+    invalidate such permission if you have separately received it.
+
+    d) If the work has interactive user interfaces, each must display
+    Appropriate Legal Notices; however, if the Program has interactive
+    interfaces that do not display Appropriate Legal Notices, your
+    work need not make them do so.
+
+  A compilation of a covered work with other separate and independent
+works, which are not by their nature extensions of the covered work,
+and which are not combined with it such as to form a larger program,
+in or on a volume of a storage or distribution medium, is called an
+"aggregate" if the compilation and its resulting copyright are not
+used to limit the access or legal rights of the compilation's users
+beyond what the individual works permit.  Inclusion of a covered work
+in an aggregate does not cause this License to apply to the other
+parts of the aggregate.
+
+  6. Conveying Non-Source Forms.
+
+  You may convey a covered work in object code form under the terms
+of sections 4 and 5, provided that you also convey the
+machine-readable Corresponding Source under the terms of this License,
+in one of these ways:
+
+    a) Convey the object code in, or embodied in, a physical product
+    (including a physical distribution medium), accompanied by the
+    Corresponding Source fixed on a durable physical medium
+    customarily used for software interchange.
+
+    b) Convey the object code in, or embodied in, a physical product
+    (including a physical distribution medium), accompanied by a
+    written offer, valid for at least three years and valid for as
+    long as you offer spare parts or customer support for that product
+    model, to give anyone who possesses the object code either (1) a
+    copy of the Corresponding Source for all the software in the
+    product that is covered by this License, on a durable physical
+    medium customarily used for software interchange, for a price no
+    more than your reasonable cost of physically performing this
+    conveying of source, or (2) access to copy the
+    Corresponding Source from a network server at no charge.
+
+    c) Convey individual copies of the object code with a copy of the
+    written offer to provide the Corresponding Source.  This
+    alternative is allowed only occasionally and noncommercially, and
+    only if you received the object code with such an offer, in accord
+    with subsection 6b.
+
+    d) Convey the object code by offering access from a designated
+    place (gratis or for a charge), and offer equivalent access to the
+    Corresponding Source in the same way through the same place at no
+    further charge.  You need not require recipients to copy the
+    Corresponding Source along with the object code.  If the place to
+    copy the object code is a network server, the Corresponding Source
+    may be on a different server (operated by you or a third party)
+    that supports equivalent copying facilities, provided you maintain
+    clear directions next to the object code saying where to find the
+    Corresponding Source.  Regardless of what server hosts the
+    Corresponding Source, you remain obligated to ensure that it is
+    available for as long as needed to satisfy these requirements.
+
+    e) Convey the object code using peer-to-peer transmission, provided
+    you inform other peers where the object code and Corresponding
+    Source of the work are being offered to the general public at no
+    charge under subsection 6d.
+
+  A separable portion of the object code, whose source code is excluded
+from the Corresponding Source as a System Library, need not be
+included in conveying the object code work.
+
+  A "User Product" is either (1) a "consumer product", which means any
+tangible personal property which is normally used for personal, family,
+or household purposes, or (2) anything designed or sold for incorporation
+into a dwelling.  In determining whether a product is a consumer product,
+doubtful cases shall be resolved in favor of coverage.  For a particular
+product received by a particular user, "normally used" refers to a
+typical or common use of that class of product, regardless of the status
+of the particular user or of the way in which the particular user
+actually uses, or expects or is expected to use, the product.  A product
+is a consumer product regardless of whether the product has substantial
+commercial, industrial or non-consumer uses, unless such uses represent
+the only significant mode of use of the product.
+
+  "Installation Information" for a User Product means any methods,
+procedures, authorization keys, or other information required to install
+and execute modified versions of a covered work in that User Product from
+a modified version of its Corresponding Source.  The information must
+suffice to ensure that the continued functioning of the modified object
+code is in no case prevented or interfered with solely because
+modification has been made.
+
+  If you convey an object code work under this section in, or with, or
+specifically for use in, a User Product, and the conveying occurs as
+part of a transaction in which the right of possession and use of the
+User Product is transferred to the recipient in perpetuity or for a
+fixed term (regardless of how the transaction is characterized), the
+Corresponding Source conveyed under this section must be accompanied
+by the Installation Information.  But this requirement does not apply
+if neither you nor any third party retains the ability to install
+modified object code on the User Product (for example, the work has
+been installed in ROM).
+
+  The requirement to provide Installation Information does not include a
+requirement to continue to provide support service, warranty, or updates
+for a work that has been modified or installed by the recipient, or for
+the User Product in which it has been modified or installed.  Access to a
+network may be denied when the modification itself materially and
+adversely affects the operation of the network or violates the rules and
+protocols for communication across the network.
+
+  Corresponding Source conveyed, and Installation Information provided,
+in accord with this section must be in a format that is publicly
+documented (and with an implementation available to the public in
+source code form), and must require no special password or key for
+unpacking, reading or copying.
+
+  7. Additional Terms.
+
+  "Additional permissions" are terms that supplement the terms of this
+License by making exceptions from one or more of its conditions.
+Additional permissions that are applicable to the entire Program shall
+be treated as though they were included in this License, to the extent
+that they are valid under applicable law.  If additional permissions
+apply only to part of the Program, that part may be used separately
+under those permissions, but the entire Program remains governed by
+this License without regard to the additional permissions.
+
+  When you convey a copy of a covered work, you may at your option
+remove any additional permissions from that copy, or from any part of
+it.  (Additional permissions may be written to require their own
+removal in certain cases when you modify the work.)  You may place
+additional permissions on material, added by you to a covered work,
+for which you have or can give appropriate copyright permission.
+
+  Notwithstanding any other provision of this License, for material you
+add to a covered work, you may (if authorized by the copyright holders of
+that material) supplement the terms of this License with terms:
+
+    a) Disclaiming warranty or limiting liability differently from the
+    terms of sections 15 and 16 of this License; or
+
+    b) Requiring preservation of specified reasonable legal notices or
+    author attributions in that material or in the Appropriate Legal
+    Notices displayed by works containing it; or
+
+    c) Prohibiting misrepresentation of the origin of that material, or
+    requiring that modified versions of such material be marked in
+    reasonable ways as different from the original version; or
+
+    d) Limiting the use for publicity purposes of names of licensors or
+    authors of the material; or
+
+    e) Declining to grant rights under trademark law for use of some
+    trade names, trademarks, or service marks; or
+
+    f) Requiring indemnification of licensors and authors of that
+    material by anyone who conveys the material (or modified versions of
+    it) with contractual assumptions of liability to the recipient, for
+    any liability that these contractual assumptions directly impose on
+    those licensors and authors.
+
+  All other non-permissive additional terms are considered "further
+restrictions" within the meaning of section 10.  If the Program as you
+received it, or any part of it, contains a notice stating that it is
+governed by this License along with a term that is a further
+restriction, you may remove that term.  If a license document contains
+a further restriction but permits relicensing or conveying under this
+License, you may add to a covered work material governed by the terms
+of that license document, provided that the further restriction does
+not survive such relicensing or conveying.
+
+  If you add terms to a covered work in accord with this section, you
+must place, in the relevant source files, a statement of the
+additional terms that apply to those files, or a notice indicating
+where to find the applicable terms.
+
+  Additional terms, permissive or non-permissive, may be stated in the
+form of a separately written license, or stated as exceptions;
+the above requirements apply either way.
+
+  8. Termination.
+
+  You may not propagate or modify a covered work except as expressly
+provided under this License.  Any attempt otherwise to propagate or
+modify it is void, and will automatically terminate your rights under
+this License (including any patent licenses granted under the third
+paragraph of section 11).
+
+  However, if you cease all violation of this License, then your
+license from a particular copyright holder is reinstated (a)
+provisionally, unless and until the copyright holder explicitly and
+finally terminates your license, and (b) permanently, if the copyright
+holder fails to notify you of the violation by some reasonable means
+prior to 60 days after the cessation.
+
+  Moreover, your license from a particular copyright holder is
+reinstated permanently if the copyright holder notifies you of the
+violation by some reasonable means, this is the first time you have
+received notice of violation of this License (for any work) from that
+copyright holder, and you cure the violation prior to 30 days after
+your receipt of the notice.
+
+  Termination of your rights under this section does not terminate the
+licenses of parties who have received copies or rights from you under
+this License.  If your rights have been terminated and not permanently
+reinstated, you do not qualify to receive new licenses for the same
+material under section 10.
+
+  9. Acceptance Not Required for Having Copies.
+
+  You are not required to accept this License in order to receive or
+run a copy of the Program.  Ancillary propagation of a covered work
+occurring solely as a consequence of using peer-to-peer transmission
+to receive a copy likewise does not require acceptance.  However,
+nothing other than this License grants you permission to propagate or
+modify any covered work.  These actions infringe copyright if you do
+not accept this License.  Therefore, by modifying or propagating a
+covered work, you indicate your acceptance of this License to do so.
+
+  10. Automatic Licensing of Downstream Recipients.
+
+  Each time you convey a covered work, the recipient automatically
+receives a license from the original licensors, to run, modify and
+propagate that work, subject to this License.  You are not responsible
+for enforcing compliance by third parties with this License.
+
+  An "entity transaction" is a transaction transferring control of an
+organization, or substantially all assets of one, or subdividing an
+organization, or merging organizations.  If propagation of a covered
+work results from an entity transaction, each party to that
+transaction who receives a copy of the work also receives whatever
+licenses to the work the party's predecessor in interest had or could
+give under the previous paragraph, plus a right to possession of the
+Corresponding Source of the work from the predecessor in interest, if
+the predecessor has it or can get it with reasonable efforts.
+
+  You may not impose any further restrictions on the exercise of the
+rights granted or affirmed under this License.  For example, you may
+not impose a license fee, royalty, or other charge for exercise of
+rights granted under this License, and you may not initiate litigation
+(including a cross-claim or counterclaim in a lawsuit) alleging that
+any patent claim is infringed by making, using, selling, offering for
+sale, or importing the Program or any portion of it.
+
+  11. Patents.
+
+  A "contributor" is a copyright holder who authorizes use under this
+License of the Program or a work on which the Program is based.  The
+work thus licensed is called the contributor's "contributor version".
+
+  A contributor's "essential patent claims" are all patent claims
+owned or controlled by the contributor, whether already acquired or
+hereafter acquired, that would be infringed by some manner, permitted
+by this License, of making, using, or selling its contributor version,
+but do not include claims that would be infringed only as a
+consequence of further modification of the contributor version.  For
+purposes of this definition, "control" includes the right to grant
+patent sublicenses in a manner consistent with the requirements of
+this License.
+
+  Each contributor grants you a non-exclusive, worldwide, royalty-free
+patent license under the contributor's essential patent claims, to
+make, use, sell, offer for sale, import and otherwise run, modify and
+propagate the contents of its contributor version.
+
+  In the following three paragraphs, a "patent license" is any express
+agreement or commitment, however denominated, not to enforce a patent
+(such as an express permission to practice a patent or covenant not to
+sue for patent infringement).  To "grant" such a patent license to a
+party means to make such an agreement or commitment not to enforce a
+patent against the party.
+
+  If you convey a covered work, knowingly relying on a patent license,
+and the Corresponding Source of the work is not available for anyone
+to copy, free of charge and under the terms of this License, through a
+publicly available network server or other readily accessible means,
+then you must either (1) cause the Corresponding Source to be so
+available, or (2) arrange to deprive yourself of the benefit of the
+patent license for this particular work, or (3) arrange, in a manner
+consistent with the requirements of this License, to extend the patent
+license to downstream recipients.  "Knowingly relying" means you have
+actual knowledge that, but for the patent license, your conveying the
+covered work in a country, or your recipient's use of the covered work
+in a country, would infringe one or more identifiable patents in that
+country that you have reason to believe are valid.
+
+  If, pursuant to or in connection with a single transaction or
+arrangement, you convey, or propagate by procuring conveyance of, a
+covered work, and grant a patent license to some of the parties
+receiving the covered work authorizing them to use, propagate, modify
+or convey a specific copy of the covered work, then the patent license
+you grant is automatically extended to all recipients of the covered
+work and works based on it.
+
+  A patent license is "discriminatory" if it does not include within
+the scope of its coverage, prohibits the exercise of, or is
+conditioned on the non-exercise of one or more of the rights that are
+specifically granted under this License.  You may not convey a covered
+work if you are a party to an arrangement with a third party that is
+in the business of distributing software, under which you make payment
+to the third party based on the extent of your activity of conveying
+the work, and under which the third party grants, to any of the
+parties who would receive the covered work from you, a discriminatory
+patent license (a) in connection with copies of the covered work
+conveyed by you (or copies made from those copies), or (b) primarily
+for and in connection with specific products or compilations that
+contain the covered work, unless you entered into that arrangement,
+or that patent license was granted, prior to 28 March 2007.
+
+  Nothing in this License shall be construed as excluding or limiting
+any implied license or other defenses to infringement that may
+otherwise be available to you under applicable patent law.
+
+  12. No Surrender of Others' Freedom.
+
+  If conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License.  If you cannot convey a
+covered work so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you may
+not convey it at all.  For example, if you agree to terms that obligate you
+to collect a royalty for further conveying from those to whom you convey
+the Program, the only way you could satisfy both those terms and this
+License would be to refrain entirely from conveying the Program.
+
+  13. Use with the GNU Affero General Public License.
+
+  Notwithstanding any other provision of this License, you have
+permission to link or combine any covered work with a work licensed
+under version 3 of the GNU Affero General Public License into a single
+combined work, and to convey the resulting work.  The terms of this
+License will continue to apply to the part which is the covered work,
+but the special requirements of the GNU Affero General Public License,
+section 13, concerning interaction through a network will apply to the
+combination as such.
+
+  14. Revised Versions of this License.
+
+  The Free Software Foundation may publish revised and/or new versions of
+the GNU General Public License from time to time.  Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+  Each version is given a distinguishing version number.  If the
+Program specifies that a certain numbered version of the GNU General
+Public License "or any later version" applies to it, you have the
+option of following the terms and conditions either of that numbered
+version or of any later version published by the Free Software
+Foundation.  If the Program does not specify a version number of the
+GNU General Public License, you may choose any version ever published
+by the Free Software Foundation.
+
+  If the Program specifies that a proxy can decide which future
+versions of the GNU General Public License can be used, that proxy's
+public statement of acceptance of a version permanently authorizes you
+to choose that version for the Program.
+
+  Later license versions may give you additional or different
+permissions.  However, no additional obligations are imposed on any
+author or copyright holder as a result of your choosing to follow a
+later version.
+
+  15. Disclaimer of Warranty.
+
+  THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY
+APPLICABLE LAW.  EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
+HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY
+OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
+THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+PURPOSE.  THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM
+IS WITH YOU.  SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF
+ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
+
+  16. Limitation of Liability.
+
+  IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS
+THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY
+GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE
+USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF
+DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
+PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
+EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF
+SUCH DAMAGES.
+
+  17. Interpretation of Sections 15 and 16.
+
+  If the disclaimer of warranty and limitation of liability provided
+above cannot be given local legal effect according to their terms,
+reviewing courts shall apply local law that most closely approximates
+an absolute waiver of all civil liability in connection with the
+Program, unless a warranty or assumption of liability accompanies a
+copy of the Program in return for a fee.
+
+                     END OF TERMS AND CONDITIONS
+
+            How to Apply These Terms to Your New Programs
+
+  If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+  To do so, attach the following notices to the program.  It is safest
+to attach them to the start of each source file to most effectively
+state the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+    <one line to give the program's name and a brief idea of what it does.>
+    Copyright (C) <year>  <name of author>
+
+    This program is free software: you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation, either version 3 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program.  If not, see <https://www.gnu.org/licenses/>.
+
+Also add information on how to contact you by electronic and paper mail.
+
+  If the program does terminal interaction, make it output a short
+notice like this when it starts in an interactive mode:
+
+    <program>  Copyright (C) <year>  <name of author>
+    This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+    This is free software, and you are welcome to redistribute it
+    under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License.  Of course, your program's commands
+might be different; for a GUI interface, you would use an "about box".
+
+  You should also get your employer (if you work as a programmer) or school,
+if any, to sign a "copyright disclaimer" for the program, if necessary.
+For more information on this, and how to apply and follow the GNU GPL, see
+<https://www.gnu.org/licenses/>.
+
+  The GNU General Public License does not permit incorporating your program
+into proprietary programs.  If your program is a subroutine library, you
+may consider it more useful to permit linking proprietary applications with
+the library.  If this is what you want to do, use the GNU Lesser General
+Public License instead of this License.  But first, please read
+<https://www.gnu.org/licenses/why-not-lgpl.html>.

releng/airootfs/usr/share/gnome-shell/extensions/blur-my-shell@aunetx/components/overview.js

@@ -148,6 +148,14 @@ export const OverviewBlur = class OverviewBlur {
         }
         // add the container widget for the overview only to the overview group
         Main.layoutManager.overviewGroup.insert_child_at_index(this.overview_background_group, 0);
+        // make sure it stays below
+        this.connections.connect(Main.layoutManager.overviewGroup, "child-added", (_, child) => {
+            if (child !== this.overview_background_group) {
+                if (this.overview_background_group.get_parent())
+                    Main.layoutManager.overviewGroup.remove_child(this.overview_background_group);
+                Main.layoutManager.overviewGroup.insert_child_at_index(this.overview_background_group, 0);
+            }
+        });
     }
 
     /// Updates the classname to style overview components with semi-transparent
@@ -166,6 +174,11 @@ export const OverviewBlur = class OverviewBlur {
     remove_background_actors() {
         this.overview_background_group.remove_all_children();
         this.animation_background_group.remove_all_children();
+
+        this.connections.disconnect_all_for(Main.layoutManager.overviewGroup);
+        if (this.overview_background_group.get_parent())
+            Main.layoutManager.overviewGroup.remove_child(this.overview_background_group);
+
         this.overview_background_managers.forEach(background_manager => {
             background_manager._bms_pipeline.destroy();
             background_manager.destroy();

releng/airootfs/usr/share/gnome-shell/extensions/blur-my-shell@aunetx/components/panel.js

@@ -54,9 +54,6 @@ export const PanelBlur = class PanelBlur {
         // the blur when a window is near a panel
         this.connect_to_windows_and_overview();
 
-        // update the classname if the panel to have or have not light text
-        this.update_light_text_classname();
-
         // connect to workareas change
         this.connections.connect(global.display, 'workareas-changed',
             _ => this.reset()
@@ -468,10 +465,14 @@ export const PanelBlur = class PanelBlur {
             this.settings.panel.OVERRIDE_BACKGROUND
             &&
             should_override
-        )
+        ) {
             panel.add_style_class_name(
                 PANEL_STYLES[this.settings.panel.STYLE_PANEL]
             );
+        }
+
+        // update the classname if the panel to have or have not light text
+        this.update_light_text_classname(!should_override);
     }
 
     update_pipeline() {

releng/airootfs/usr/share/gnome-shell/extensions/blur-my-shell@aunetx/effects/effects.js

@@ -148,6 +148,11 @@ export function get_supported_effects(_ = () => "") {
                     name: _("Use base pixel"),
                     description: _("Whether or not the original pixel is counted for the blur. If it is, the image will be more legible."),
                     type: "boolean"
+                },
+                prefer_closer_pixels: {
+                    name: _("Prefer closer pixels"),
+                    description: _("Whether or not the pixels that are closer to the original pixel will have more weight."),
+                    type: "boolean"
                 }
             }
         },

releng/airootfs/usr/share/gnome-shell/extensions/blur-my-shell@aunetx/effects/monte_carlo_blur.glsl

@@ -5,6 +5,7 @@ uniform float brightness;
 uniform float width;
 uniform float height;
 uniform bool use_base_pixel;
+uniform bool prefer_closer_pixels;
 
 float srand(vec2 a) {
     return sin(dot(a, vec2(1233.224, 1743.335)));
@@ -19,24 +20,31 @@ void main() {
     vec2 uv = cogl_tex_coord0_in.st;
     vec2 p = 16 * radius / vec2(width, height);
     float r = srand(uv);
+
     vec2 rv;
+    vec2 dir;
+    vec2 new_uv;
+    int strength;
 
     int count = 0;
     vec4 c = vec4(0.);
 
     for (int i = 0; i < iterations; i++) {
         rv.x = rand(r);
-        rv.y = rand(r);
+        rv.y = rand(r) * 3.141592;
-        vec2 new_uv = uv + rv * p;
+        dir = vec2(cos(rv.y), sin(rv.y));
+        new_uv = uv + rv.x * dir * p;
         if (new_uv.x > 2. / width && new_uv.y > 2. / height && new_uv.x < 1. - 3. / width && new_uv.y < 1. - 3. / height) {
-            c += texture2D(tex, new_uv);
+            strength = prefer_closer_pixels ? (iterations - i)^2 : 1;
-            count += 1;
+            c += strength * texture2D(tex, new_uv);
+            count += strength;
         }
     }
 
     if (count == 0 || use_base_pixel) {
-        c += texture2D(tex, uv);
+        strength = prefer_closer_pixels ? (iterations + 1)^2 : 1;
-        count += 1;
+        c += strength * texture2D(tex, uv);
+        count += strength;
     }
 
     c.xyz *= brightness;

releng/airootfs/usr/share/gnome-shell/extensions/blur-my-shell@aunetx/effects/monte_carlo_blur.js

@@ -8,7 +8,8 @@ const Clutter = await utils.import_in_shell_only('gi://Clutter');
 const SHADER_FILENAME = 'monte_carlo_blur.glsl';
 const DEFAULT_PARAMS = {
     radius: 2., iterations: 5, brightness: .6,
-    width: 0, height: 0, use_base_pixel: true
+    width: 0, height: 0, use_base_pixel: true,
+    prefer_closer_pixels: true,
 };
 
 
@@ -64,6 +65,13 @@ export const MonteCarloBlurEffect = utils.IS_IN_PREFERENCES ?
                 GObject.ParamFlags.READWRITE,
                 true,
             ),
+            'prefer_closer_pixels': GObject.ParamSpec.boolean(
+                `prefer_closer_pixels`,
+                `Prefer closer pixels`,
+                `Prefer closer pixels`,
+                GObject.ParamFlags.READWRITE,
+                true,
+            ),
         }
     }, class MonteCarloBlurEffect extends Clutter.ShaderEffect {
         constructor(params) {
@@ -166,6 +174,18 @@ export const MonteCarloBlurEffect = utils.IS_IN_PREFERENCES ?
             }
         }
 
+        get prefer_closer_pixels() {
+            return this._prefer_closer_pixels;
+        }
+
+        set prefer_closer_pixels(value) {
+            if (this._prefer_closer_pixels !== value) {
+                this._prefer_closer_pixels = value;
+
+                this.set_uniform_value('prefer_closer_pixels', this._prefer_closer_pixels ? 1 : 0);
+            }
+        }
+
         vfunc_set_actor(actor) {
             if (this._actor_connection_size_id) {
                 let old_actor = this.get_actor();

releng/airootfs/usr/share/gnome-shell/extensions/blur-my-shell@aunetx/extension.js

@@ -1,6 +1,7 @@
 import Meta from 'gi://Meta';
 import Clutter from 'gi://Clutter';
 import * as Main from 'resource:///org/gnome/shell/ui/main.js';
+import * as Config from 'resource:///org/gnome/shell/misc/config.js';
 
 import { Extension } from 'resource:///org/gnome/shell/extensions/extension.js';
 
@@ -253,16 +254,28 @@ export default class BlurMyShell extends Extension {
 
     /// Add the Clutter debug flag.
     _disable_clipped_redraws() {
-        Meta.add_clutter_debug_flags(
+        let gnome_shell_major_version = parseInt(Config.PACKAGE_VERSION.split('.')[0]);
-            null, Clutter.DrawDebugFlag.DISABLE_CLIPPED_REDRAWS, null
+        if (gnome_shell_major_version >= 48)
-        );
+            Clutter.add_debug_flags(
+                null, Clutter.DrawDebugFlag.DISABLE_CLIPPED_REDRAWS, null
+            );
+        else
+            Meta.add_clutter_debug_flags(
+                null, Clutter.DrawDebugFlag.DISABLE_CLIPPED_REDRAWS, null
+            );
     }
 
     /// Remove the Clutter debug flag.
     _reenable_clipped_redraws() {
-        Meta.remove_clutter_debug_flags(
+        let gnome_shell_major_version = parseInt(Config.PACKAGE_VERSION.split('.')[0]);
-            null, Clutter.DrawDebugFlag.DISABLE_CLIPPED_REDRAWS, null
+        if (gnome_shell_major_version >= 48)
-        );
+            Clutter.remove_debug_flags(
+                null, Clutter.DrawDebugFlag.DISABLE_CLIPPED_REDRAWS, null
+            );
+        else
+            Meta.remove_clutter_debug_flags(
+                null, Clutter.DrawDebugFlag.DISABLE_CLIPPED_REDRAWS, null
+            );
     }
 
     /// Enables every component from the user session needed, should be called when the shell is

releng/airootfs/usr/share/gnome-shell/extensions/blur-my-shell@aunetx/metadata.json

@@ -17,9 +17,10 @@
   "settings-schema": "org.gnome.shell.extensions.blur-my-shell",
   "shell-version": [
     "46",
-    "47"
+    "47",
+    "48"
   ],
   "url": "https://github.com/aunetx/blur-my-shell",
   "uuid": "blur-my-shell@aunetx",
-  "version": 67
+  "version": 68
 }

releng/airootfs/usr/share/gnome-shell/extensions/burn-my-windows@schneegans.github.com/extension.js

@@ -23,6 +23,7 @@ import {WindowPicker} from './src/WindowPicker.js';
 import * as utils from './src/utils.js';
 
 import Apparition from './src/effects/Apparition.js';
+import AuraGlow from './src/effects/AuraGlow.js';
 import BrokenGlass from './src/effects/BrokenGlass.js';
 import Doom from './src/effects/Doom.js';
 import EnergizeA from './src/effects/EnergizeA.js';
@@ -34,18 +35,20 @@ import Glitch from './src/effects/Glitch.js';
 import Hexagon from './src/effects/Hexagon.js';
 import Incinerate from './src/effects/Incinerate.js';
 import Matrix from './src/effects/Matrix.js';
+import Mushroom from './src/effects/Mushroom.js';
 import PaintBrush from './src/effects/PaintBrush.js';
 import Pixelate from './src/effects/Pixelate.js';
 import PixelWheel from './src/effects/PixelWheel.js';
 import PixelWipe from './src/effects/PixelWipe.js';
 import Portal from './src/effects/Portal.js';
+import RGBWarp from './src/effects/RGBWarp.js';
 import SnapOfDisintegration from './src/effects/SnapOfDisintegration.js';
+import TeamRocket from './src/effects/TeamRocket.js';
 import TRexAttack from './src/effects/TRexAttack.js';
 import TVEffect from './src/effects/TVEffect.js';
 import TVGlitch from './src/effects/TVGlitch.js';
 import Wisps from './src/effects/Wisps.js';
 
-
 import * as Main from 'resource:///org/gnome/shell/ui/main.js';
 import {Workspace} from 'resource:///org/gnome/shell/ui/workspace.js';
 import {WindowPreview} from 'resource:///org/gnome/shell/ui/windowPreview.js';
@@ -71,14 +74,13 @@ export default class BurnMyWindows extends Extension {
 
     // New effects must be registered here and in prefs.js.
     this._ALL_EFFECTS = [
-      new Apparition(), new BrokenGlass(), new Doom(),
+      new Apparition(), new AuraGlow(),   new BrokenGlass(), new Doom(),
-      new EnergizeA(),  new EnergizeB(),   new Fire(),
+      new EnergizeA(),  new EnergizeB(),  new Fire(),        new Focus(),
-      new Focus(),      new Glide(),       new Glitch(),
+      new Glide(),      new Glitch(),     new Hexagon(),     new Incinerate(),
-      new Hexagon(),    new Incinerate(),  new Matrix(),
+      new Matrix(),     new PaintBrush(), new Pixelate(),    new PixelWheel(),
-      new PaintBrush(), new Pixelate(),    new PixelWheel(),
+      new PixelWipe(),  new Portal(),     new RGBWarp(),     new SnapOfDisintegration(),
-      new PixelWipe(),  new Portal(),      new SnapOfDisintegration(),
+      new TeamRocket(), new TRexAttack(), new TVEffect(),    new TVGlitch(),
-      new TRexAttack(), new TVEffect(),    new TVGlitch(),
+      new Wisps(),      new Mushroom()
-      new Wisps(),
     ];
 
     // Load all of our resources.

releng/airootfs/usr/share/gnome-shell/extensions/burn-my-windows@schneegans.github.com/metadata.json

@@ -12,9 +12,10 @@
   "shell-version": [
     "45",
     "46",
-    "47"
+    "47",
+    "48"
   ],
   "url": "https://github.com/Schneegans/Burn-My-Windows",
   "uuid": "burn-my-windows@schneegans.github.com",
-  "version": 44
+  "version": 46
 }

releng/airootfs/usr/share/gnome-shell/extensions/burn-my-windows@schneegans.github.com/prefs.js

@@ -24,6 +24,7 @@ import * as utils from './src/utils.js';
 import {ProfileManager} from './src/ProfileManager.js';
 
 import Apparition from './src/effects/Apparition.js';
+import AuraGlow from './src/effects/AuraGlow.js';
 import BrokenGlass from './src/effects/BrokenGlass.js';
 import Doom from './src/effects/Doom.js';
 import EnergizeA from './src/effects/EnergizeA.js';
@@ -35,12 +36,15 @@ import Glitch from './src/effects/Glitch.js';
 import Hexagon from './src/effects/Hexagon.js';
 import Incinerate from './src/effects/Incinerate.js';
 import Matrix from './src/effects/Matrix.js';
+import Mushroom from './src/effects/Mushroom.js';
 import PaintBrush from './src/effects/PaintBrush.js';
 import Pixelate from './src/effects/Pixelate.js';
 import PixelWheel from './src/effects/PixelWheel.js';
 import PixelWipe from './src/effects/PixelWipe.js';
 import Portal from './src/effects/Portal.js';
+import RGBWarp from './src/effects/RGBWarp.js';
 import SnapOfDisintegration from './src/effects/SnapOfDisintegration.js';
+import TeamRocket from './src/effects/TeamRocket.js';
 import TRexAttack from './src/effects/TRexAttack.js';
 import TVEffect from './src/effects/TVEffect.js';
 import TVGlitch from './src/effects/TVGlitch.js';
@@ -71,10 +75,15 @@ export default class BurnMyWindowsPreferences extends ExtensionPreferences {
 
     // New effects must be registered here and in extension.js.
     this._ALL_EFFECTS = [
-      Apparition, BrokenGlass, Doom,       EnergizeA, EnergizeB,  Fire,
+      Apparition, AuraGlow,   BrokenGlass,
-      Focus,      Glide,       Glitch,     Hexagon,   Incinerate, Matrix,
+      Doom,       EnergizeA,  EnergizeB,
-      PaintBrush, Pixelate,    PixelWheel, PixelWipe, Portal,     SnapOfDisintegration,
+      Fire,       Focus,      Glide,
-      TRexAttack, TVEffect,    TVGlitch,   Wisps,
+      Glitch,     Hexagon,    Incinerate,
+      Matrix,     Mushroom,   PaintBrush,
+      Pixelate,   PixelWheel, PixelWipe,
+      Portal,     RGBWarp,    SnapOfDisintegration,
+      TeamRocket, TRexAttack, TVEffect,
+      TVGlitch,   Wisps,
     ];
 
 
@@ -183,22 +192,33 @@ export default class BurnMyWindowsPreferences extends ExtensionPreferences {
     this._searchEntry.connect('search-changed', () => {
       const query = this._searchEntry.get_text().toLowerCase();
 
-      this._effectRows.forEach(er => {
+      // If only one effect is left, we will expand it automatically.
+      let lastRow = null;
+      let numRows = 0;
+
+      this._effectRows.forEach(row => {
+        row.set_expanded(false);
+
         if (query === '') {
-          er.show();  // Show all effects if query is empty
+          row.show();  // Show all effects if query is empty
         } else {
           // Show or hide each effect based on query match
-          const showEffect = er.name.toLowerCase().includes(query);
+          const showEffect = row.name.toLowerCase().includes(query);
-          showEffect ? er.show() : er.hide();
 
-          // TODO
+          if (showEffect) {
-          // maybe add a fuzzy search later
+            row.show();
-          /*
+            lastRow = row;
-          const showEffect = utils.fuzzyMatch(er.name.toLowerCase(),
+            numRows++;
-          query.toLowerCase()); showEffect ? er.show() : er.hide();
+          } else {
-          */
+            row.hide();
+          }
         }
       });
+
+      // If only one effect is left, we expand it automatically.
+      if (numRows === 1) {
+        lastRow.set_expanded(true);
+      }
     });
 
     // Then add a preferences group for the effect expander rows.

releng/airootfs/usr/share/gnome-shell/extensions/burn-my-windows@schneegans.github.com/schemas/org.gnome.shell.extensions.burn-my-windows-profile.gschema.xml

@@ -242,6 +242,12 @@ SPDX-License-Identifier: CC0-1.0
       <description>The size of the fire.</description>
     </key>
 
+    <key name="fire-random-color" type="b">
+      <default>false</default>
+      <summary>use a random color for the fire</summary>
+      <description>use a random color of the fire</description>
+    </key>
+    
     <key name="fire-3d-noise" type="b">
       <default>false</default>
       <summary>Fire 3D Noise</summary>
@@ -823,7 +829,7 @@ SPDX-License-Identifier: CC0-1.0
 
 
     <!-- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -->
-    <!-- Simple Fade Effect Options                                                    -->
+    <!-- Focus Effect Options                                                    -->
     <!-- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -->
 
     <key name="focus-enable-effect" type="b">
@@ -850,6 +856,264 @@ SPDX-License-Identifier: CC0-1.0
       <description>The Quality of the Blur (Setting this too high may increase GPU load and affect performance)</description>
     </key>
 
+    <!-- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -->
+    <!-- Mushroom Effect Options                                                    -->
+    <!-- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -->
+
+    <key name="mushroom-enable-effect" type="b">
+      <default>false</default>
+      <summary>mushroom Enable Effect</summary>
+      <description>Use the mushroom effect.</description>
+    </key>
+
+    <key name="mushroom-animation-time" type="i">
+      <default>1500</default>
+      <summary>mushroom Animation Time</summary>
+      <description>The time the mushroom effect takes.</description>
+    </key>
+
+    <!-- <key name="mushroom-8bit-enable" type="b">
+      <default>true</default>
+      <summary>mushroom 8Bit Animation</summary>
+      <description>use the old style.</description>
+    </key> -->
+
+    <key name="mushroom-scale-style" type="d">
+      <default>1.0</default>
+      <summary>8Bit or Smooth Scaling</summary>
+      <description>How the window scales</description>
+    </key>
+
+    <key name="mushroom-spark-count" type="i">
+      <default>4</default>
+      <summary>The Number of Sparks</summary>
+      <description>The Number of Sparks</description>
+    </key>
+
+    <key name="mushroom-spark-color" type="s">
+      <default>"rgba(255, 255, 255, 1.0)"</default>
+      <summary>The Sparks Color</summary>
+      <description>The Sparks Color</description>
+    </key>
+
+    <key name="mushroom-spark-rotation" type="d">
+      <default>0.3</default>
+      <summary>The Number of Rotations the Sparks do</summary>
+      <description>The Number of Rotations the Sparks do</description>
+    </key>
+
+    <key name="mushroom-rays-color" type="s">
+      <default>"rgba(255, 255, 255, 1.0)"</default>
+      <summary>The Rays Color</summary>
+      <description>The Rays Color</description>
+    </key>
+
+    <key name="mushroom-ring-count" type="i">
+      <default>3</default>
+      <summary>Number of Rings</summary>
+      <description>Number of Rings</description>
+    </key>
+
+    <key name="mushroom-ring-rotation" type="d">
+      <default>1.33</default>
+      <summary>The Number of Rotations/Cycles the Stars do</summary>
+      <description>The Number of Rotations/Cycles the Stars do</description>
+    </key>
+
+    <key name="mushroom-star-count" type="i">
+      <default>5</default>
+      <summary>The Number of Stars in each Ring</summary>
+      <description>The Number of Stars in each Ring</description>
+    </key>
+
+    <key name="mushroom-star-color-0" type="s">
+      <default>"rgba(233, 249, 1, 1.0)"</default>
+      <summary>Star Color 1</summary>
+      <description>The Nth color of the Star gradient.</description>
+    </key>
+
+    <key name="mushroom-star-color-1" type="s">
+      <default>"rgba(233, 249, 1, 1.0)"</default>
+      <summary>Star Color 1</summary>
+      <description>The Nth color of the Star gradient.</description>
+    </key>
+
+    <key name="mushroom-star-color-2" type="s">
+      <default>"rgba(91, 255, 1, 1.0)"</default>
+      <summary>Star Color 1</summary>
+      <description>The Nth color of the Star gradient.</description>
+    </key>
+
+    <key name="mushroom-star-color-3" type="s">
+      <default>"rgba(91, 255, 1, 1.0)"</default>
+      <summary>Star Color 1</summary>
+      <description>The Nth color of the Star gradient.</description>
+    </key>
+
+    <key name="mushroom-star-color-4" type="s">
+      <default>"rgba(0, 240, 236, 1.0)"</default>
+      <summary>Star Color 1</summary>
+      <description>The Nth color of the Star gradient.</description>
+    </key>
+
+    <key name="mushroom-star-color-5" type="s">
+      <default>"rgba(0, 240, 236, 1.0)"</default>
+      <summary>Star Color 1</summary>
+      <description>The Nth color of the Star gradient.</description>
+    </key>
+
+
+    <!-- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -->
+    <!-- Aura Glow Effect Options                                                    -->
+    <!-- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -->
+
+    <key name="aura-glow-enable-effect" type="b">
+      <default>false</default>
+      <summary>Aura Glow Enable Effect</summary>
+      <description>Use the Aura Glow effect.</description>
+    </key>
+
+    <key name="aura-glow-animation-time" type="i">
+      <default>750</default>
+      <summary>Aura Glow Animation Time</summary>
+      <description>The time the Aura Glow effect takes.</description>
+    </key>
+
+    <key name="aura-glow-random-color" type="b">
+      <default>false</default>
+      <summary>Aura Glow Random Color Offset</summary>
+      <description>Ramdomize the color offset</description>
+    </key>
+
+    <key name="aura-glow-start-hue" type="d">
+      <default>0.0</default>
+      <summary>Aura Glow Color Offset</summary>
+      <description>Changes the inital color of the glow</description>
+    </key>
+
+    <key name="aura-glow-speed" type="d">
+      <default>2.5</default>
+      <summary>Aura Glow Color Speed</summary>
+      <description>The Speed at which the color changes</description>
+    </key>
+
+    <key name="aura-glow-saturation" type="d">
+      <default>0.75</default>
+      <summary>Aura Glow Color Saturation</summary>
+      <description>Amount of color in the effect</description>
+    </key>
+
+    <key name="aura-glow-edge-size" type="d">
+      <default>0.75</default>
+      <summary>Aura Glow Size of the Color Edge</summary>
+      <description>Size of the Color Edge</description>
+    </key>
+
+    <key name="aura-glow-edge-hardness" type="d">
+      <default>0.25</default>
+      <summary>Aura Glow Edge Hardness</summary>
+      <description>The Hardness of the Edge</description>
+    </key>
+
+    <key name="aura-glow-blur" type="d">
+      <default>15.0</default>
+      <summary>Aura Glow Blur</summary>
+      <description>Changes the Blue Amount</description>
+    </key>
+
+    <!-- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -->
+    <!-- RGBWarp Effect Options                                                    -->
+    <!-- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -->
+
+    <key name="rgbwarp-enable-effect" type="b">
+      <default>false</default>
+      <summary>RGBWarp Enable Effect</summary>
+      <description>Use the RGBWarp.</description>
+    </key>
+
+    <key name="rgbwarp-animation-time" type="i">
+      <default>750</default>
+      <summary>RGBWarp Animation Time</summary>
+      <description>The time the RGBWarp effect takes.</description>
+    </key>
+
+    <key name="rgbwarp-brightness" type="d">
+      <default>1.0</default>
+      <summary>RGBWarp Brightness</summary>
+      <description>brightness of the effect.</description>
+    </key>
+
+    <key name="rgbwarp-speed-r" type="d">
+      <default>1.0</default>
+      <summary>RGBWarp Red Speed</summary>
+      <description>Red speed of the effect.</description>
+    </key>
+
+    <key name="rgbwarp-speed-g" type="d">
+      <default>0.90</default>
+      <summary>RGBWarp Green Speed</summary>
+      <description>Green speed of the effect.</description>
+    </key>
+
+    <key name="rgbwarp-speed-b" type="d">
+      <default>0.80</default>
+      <summary>RGBWarp Blue Speed</summary>
+      <description>Blue speed of the effect.</description>
+    </key>
+
+    <!-- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -->
+    <!-- Team Rocket Effect Options                                                    -->
+    <!-- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -->
+
+    <key name="team-rocket-enable-effect" type="b">
+      <default>false</default>
+      <summary>Team Rocket Enable Effect</summary>
+      <description>Use the Team Rocket effect.</description>
+    </key>
+
+    <key name="team-rocket-animation-time" type="i">
+      <default>1500</default>
+      <summary>Team Rocket Animation Time</summary>
+      <description>The time the Team Rocket effect takes.</description>
+    </key>
+
+    <key name="team-rocket-animation-split" type="d">
+      <default>0.5</default>
+      <summary>Window vs Sparkle split</summary>
+      <description>Window vs Sparkle split</description>
+    </key>
+
+    <key name="team-rocket-horizontal-sparkle-position" type="d">
+      <default>0.0</default>
+      <summary>Team Rocket X</summary>
+      <description>X position</description>
+    </key>
+
+    <key name="team-rocket-vertical-sparkle-position" type="d">
+      <default>0.5</default>
+      <summary>Team Rocket Y</summary>
+      <description>Y position</description>
+    </key>
+
+    <key name="team-rocket-window-rotation" type="b">
+      <default>true</default>
+      <summary>Rotate the Window</summary>
+      <description>Rotate the Window</description>
+    </key>
+
+    <key name="team-rocket-sparkle-rot" type="d">
+      <default>0.33</default>
+      <summary>Sparkle Rotation</summary>
+      <description>Sparkle Rotation</description>
+    </key>
+
+    <key name="team-rocket-sparkle-size" type="d">
+      <default>0.75</default>
+      <summary>Sparkle Size</summary>
+      <description>Sparkle Size</description>
+    </key>
+
+
   </schema>
 
-</schemalist>
+</schemalist>

releng/airootfs/usr/share/gnome-shell/extensions/burn-my-windows@schneegans.github.com/src/Shader.js

@@ -16,6 +16,7 @@
 
 import Gio from 'gi://Gio';
 import Shell from 'gi://Shell';
+import Cogl from 'gi://Cogl';
 import GObject from 'gi://GObject';
 import Clutter from 'gi://Clutter';
 import Meta from 'gi://Meta';
@@ -47,166 +48,178 @@ import * as utils from './utils.js';
 //                         used to clean up any resources.
 //////////////////////////////////////////////////////////////////////////////////////////
 
-export var Shader = GObject.registerClass(
+export var Shader = GObject.registerClass({
-  {
+  Signals: {
-    Signals: {
+    'begin-animation': {
-      'begin-animation': {
+      param_types: [
-        param_types: [
+        Gio.Settings.$gtype, GObject.TYPE_BOOLEAN, GObject.TYPE_BOOLEAN,
-          Gio.Settings.$gtype, GObject.TYPE_BOOLEAN, GObject.TYPE_BOOLEAN,
+        Clutter.Actor.$gtype
-          Clutter.Actor.$gtype
+      ]
-        ]
+    },
-      },
+    'update-animation': {param_types: [GObject.TYPE_DOUBLE]},
-      'update-animation': {param_types: [GObject.TYPE_DOUBLE]},
+    'end-animation': {}
-      'end-animation': {}
+  }
-    }
+},
-  },
-  class Shader extends Shell.GLSLEffect {  // --------------------------------------------
-    // The constructor automagically loads the shader's source code (in
-    // vfunc_build_pipeline()) from the resource file resources/shaders/<nick>.glsl
-    // resolving any #includes in this file.
-    _init(nick) {
-      this._nick = nick;
 
-      // This will call vfunc_build_pipeline().
+                                          class Shader extends Shell.GLSLEffect {
-      super._init();
+  // --------------------------------------------
+  // The constructor automagically loads the shader's source code (in
+  // vfunc_build_pipeline()) from the resource file resources/shaders/<nick>.glsl
+  // resolving any #includes in this file.
+  _init(nick) {
+    this._nick = nick;
 
-      // These will be updated during the animation.
+    // This will call vfunc_build_pipeline().
-      this._progress = 0;
+    super._init();
-      this._time     = 0;
 
-      // Store standard uniform locations.
+    // These will be updated during the animation.
-      this._uForOpening   = this.get_uniform_location('uForOpening');
+    this._progress = 0;
-      this._uIsFullscreen = this.get_uniform_location('uIsFullscreen');
+    this._time     = 0;
-      this._uProgress     = this.get_uniform_location('uProgress');
-      this._uDuration     = this.get_uniform_location('uDuration');
-      this._uSize         = this.get_uniform_location('uSize');
-      this._uPadding      = this.get_uniform_location('uPadding');
 
-      // Create a timeline to drive the animation.
+    // Store standard uniform locations.
-      this._timeline = new Clutter.Timeline();
+    this._uForOpening   = this.get_uniform_location('uForOpening');
+    this._uIsFullscreen = this.get_uniform_location('uIsFullscreen');
+    this._uProgress     = this.get_uniform_location('uProgress');
+    this._uDuration     = this.get_uniform_location('uDuration');
+    this._uSize         = this.get_uniform_location('uSize');
+    this._uPadding      = this.get_uniform_location('uPadding');
 
-      // Call updateAnimation() once a frame.
+    // Create a timeline to drive the animation.
-      this._timeline.connect('new-frame', (t) => {
+    this._timeline = new Clutter.Timeline();
-        if (this._testMode) {
-          this.updateAnimation(0.5);
-        } else {
-          this.updateAnimation(t.get_progress());
-        }
-      });
 
-      // Clean up if the animation finished or was interrupted.
+    // Call updateAnimation() once a frame.
-      this._timeline.connect('stopped', (t, finished) => {
+    this._timeline.connect('new-frame', (t) => {
-        this.endAnimation();
+      if (this._testMode) {
-      });
+        this.updateAnimation(0.5);
+      } else {
+        this.updateAnimation(t.get_progress());
+      }
+    });
+
+    // Clean up if the animation finished or was interrupted.
+    this._timeline.connect('stopped', (t, finished) => {
+      this.endAnimation();
+    });
+  }
+
+  // This is called once each time the shader is used.
+  beginAnimation(settings, forOpening, testMode, duration, actor) {
+    if (this._timeline.is_playing()) {
+      this._timeline.stop();
     }
 
-    // This is called once each time the shader is used.
+    // On GNOME 3.36 this method was not yet available.
-    beginAnimation(settings, forOpening, testMode, duration, actor) {
+    if (this._timeline.set_actor) {
-      if (this._timeline.is_playing()) {
+      this._timeline.set_actor(actor);
-        this._timeline.stop();
+    }
-      }
 
-      // On GNOME 3.36 this method was not yet available.
+    this._timeline.set_duration(duration);
-      if (this._timeline.set_actor) {
+    this._timeline.start();
-        this._timeline.set_actor(actor);
-      }
 
-      this._timeline.set_duration(duration);
+    // Make sure that no fullscreen window is drawn over our animations. Since GNOME 48
-      this._timeline.start();
+    // this is a "global" method.
-
+    if (Meta.disable_unredirect_for_display) {
-      // Make sure that no fullscreen window is drawn over our animations.
       Meta.disable_unredirect_for_display(global.display);
-      global.begin_work();
+    } else {
-
+      global.compositor.disable_unredirect();
-      // Reset progress value.
-      this._progress = 0;
-      this._testMode = testMode;
-
-      // This is not necessarily symmetric, but I haven't figured out a way to
-      // get the actual values...
-      const padding = (actor.width - actor.meta_window.get_frame_rect().width) / 2;
-      const isFullscreen =
-        actor.meta_window.get_maximized() === Meta.MaximizeFlags.BOTH ||
-        actor.meta_window.fullscreen;
-
-      this.set_uniform_float(this._uPadding, 1, [padding]);
-      this.set_uniform_float(this._uForOpening, 1, [forOpening]);
-      this.set_uniform_float(this._uIsFullscreen, 1, [isFullscreen]);
-      this.set_uniform_float(this._uDuration, 1, [duration * 0.001]);
-      this.set_uniform_float(this._uSize, 2, [actor.width, actor.height]);
-
-      this.emit('begin-animation', settings, forOpening, testMode, actor);
     }
 
-    // This is called at each frame during the animation.
+    global.begin_work();
-    updateAnimation(progress) {
-      // Store the current progress value. The corresponding signal is emitted each frame
-      // in vfunc_paint_target. We do not emit it here, as the pipeline which may be used
-      // by handlers must not have been created yet.
-      this._progress = progress;
 
-      this.queue_repaint();
+    // Reset progress value.
+    this._progress = 0;
+    this._testMode = testMode;
+
+    // This is not necessarily symmetric, but I haven't figured out a way to
+    // get the actual values...
+    const padding      = (actor.width - actor.meta_window.get_frame_rect().width) / 2;
+    const isFullscreen = actor.meta_window.get_maximized() === Meta.MaximizeFlags.BOTH ||
+      actor.meta_window.fullscreen;
+
+    this.set_uniform_float(this._uPadding, 1, [padding]);
+    this.set_uniform_float(this._uForOpening, 1, [forOpening]);
+    this.set_uniform_float(this._uIsFullscreen, 1, [isFullscreen]);
+    this.set_uniform_float(this._uDuration, 1, [duration * 0.001]);
+    this.set_uniform_float(this._uSize, 2, [actor.width, actor.height]);
+
+    this.emit('begin-animation', settings, forOpening, testMode, actor);
+  }
+
+  // This is called at each frame during the animation.
+  updateAnimation(progress) {
+    // Store the current progress value. The corresponding signal is emitted each frame
+    // in vfunc_paint_target. We do not emit it here, as the pipeline which may be used
+    // by handlers must not have been created yet.
+    this._progress = progress;
+
+    this.queue_repaint();
+  }
+
+  // This will stop any running animation and emit the end-animation signal.
+  endAnimation() {
+    // This will call endAnimation() again, so we can return for now.
+    if (this._timeline.is_playing()) {
+      this._timeline.stop();
+      return;
     }
 
-    // This will stop any running animation and emit the end-animation signal.
+    // Restore unredirecting behavior for fullscreen windows. Since GNOME 48 this is a
-    endAnimation() {
+    // "global" method.
-      // This will call endAnimation() again, so we can return for now.
+    if (Meta.disable_unredirect_for_display) {
-      if (this._timeline.is_playing()) {
-        this._timeline.stop();
-        return;
-      }
-
-      // Restore unredirecting behavior for fullscreen windows.
       Meta.enable_unredirect_for_display(global.display);
-      global.end_work();
+    } else {
-
+      global.compositor.enable_unredirect();
-      this.emit('end-animation');
     }
+    global.end_work();
 
-    // This is called by the constructor. This means, it's only called when the
+    this.emit('end-animation');
-    // effect is used for the first time.
+  }
-    vfunc_build_pipeline() {
 
-      // Shell.GLSLEffect requires the declarations and the main source code as separate
+  // This is called by the constructor. This means, it's only called when the
-      // strings. As it's more convenient to store the in one GLSL file, we use a regex
+  // effect is used for the first time.
-      // here to split the source code in two parts.
+  vfunc_build_pipeline() {
-      const code = this._loadShaderResource(`/shaders/${this._nick}.frag`);
+    // Shell.GLSLEffect requires the declarations and the main source code as separate
+    // strings. As it's more convenient to store the in one GLSL file, we use a regex
+    // here to split the source code in two parts.
+    const code = this._loadShaderResource(`/shaders/${this._nick}.frag`);
 
-      // Match anything between the curly brackets of "void main() {...}".
+    // Match anything between the curly brackets of "void main() {...}".
-      const regex = RegExp('void main *\\(\\) *\\{([\\S\\s]+)\\}');
+    const regex = RegExp('void main *\\(\\) *\\{([\\S\\s]+)\\}');
-      const match = regex.exec(code);
+    const match = regex.exec(code);
 
-      const declarations = code.substr(0, match.index);
+    const declarations = code.substr(0, match.index);
-      const main         = match[1];
+    const main         = match[1];
 
-      this.add_glsl_snippet(Shell.SnippetHook.FRAGMENT, declarations, main, true);
+    this.add_glsl_snippet(
-    }
+      Cogl.SnippetHook ? Cogl.SnippetHook.FRAGMENT : Shell.SnippetHook.FRAGMENT,
+      declarations, main, true);
+  }
 
-    // We use this vfunc to trigger the update as it allows calling this.get_pipeline() in
+  // We use this vfunc to trigger the update as it allows calling this.get_pipeline() in
-    // the handler. This could still be null if called from the updateAnimation() above.
+  // the handler. This could still be null if called from the updateAnimation() above.
-    vfunc_paint_target(...params) {
+  vfunc_paint_target(...params) {
-      this.emit('update-animation', this._progress);
+    this.emit('update-animation', this._progress);
 
-      // Starting with GNOME 44.2, the alpha channel is not written to by default. We need
+    // Starting with GNOME 44.2, the alpha channel is not written to by default. We need
-      // to undo this. It is a pity that we have to do this here, as it is not really
+    // to undo this. It is a pity that we have to do this here, as it is not really
-      // required to be done each frame. But it's the only place where we can do it.
+    // required to be done each frame. But it's the only place where we can do it.
-      // https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2650
+    // https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2650
-      this.get_pipeline().set_blend(
+    this.get_pipeline().set_blend(
-        'RGBA = ADD (SRC_COLOR * (SRC_COLOR[A]), DST_COLOR * (1-SRC_COLOR[A]))');
+      'RGBA = ADD (SRC_COLOR * (SRC_COLOR[A]), DST_COLOR * (1-SRC_COLOR[A]))');
 
-      this.set_uniform_float(this._uProgress, 1, [this._progress]);
+    this.set_uniform_float(this._uProgress, 1, [this._progress]);
-      super.vfunc_paint_target(...params);
+    super.vfunc_paint_target(...params);
-    }
+  }
 
-    // --------------------------------------------------------------------- private stuff
+  // --------------------------------------------------------------------- private stuff
 
-    // This loads a GLSL file from the extension's resources to a JavaScript string. The
+  // This loads a GLSL file from the extension's resources to a JavaScript string. The
-    // code from "common.glsl" is prepended automatically.
+  // code from "common.glsl" is prepended automatically.
-    _loadShaderResource(path) {
+  _loadShaderResource(path) {
-      let common = utils.getStringResource('/shaders/common.glsl');
+    let common = utils.getStringResource('/shaders/common.glsl');
-      let code   = utils.getStringResource(path);
+    let code   = utils.getStringResource(path);
 
-      // Add a trailing newline. Else the GLSL compiler complains...
+    // Add a trailing newline. Else the GLSL compiler complains...
-      return common + '\n' + code + '\n';
+    return common + '\n' + code + '\n';
-    }
+  }
-  });
+});

releng/airootfs/usr/share/gnome-shell/extensions/burn-my-windows@schneegans.github.com/src/ShaderFactory.js

@@ -91,4 +91,4 @@ export default class ShaderFactory {
 
     return shader;
   }
-}
+}

releng/airootfs/usr/share/gnome-shell/extensions/burn-my-windows@schneegans.github.com/src/effects/AuraGlow.js

@@ -0,0 +1,134 @@
+//////////////////////////////////////////////////////////////////////////////////////////
+//          )                                                   (                       //
+//       ( /(   (  (               )    (       (  (  (         )\ )    (  (            //
+//       )\()) ))\ )(   (         (     )\ )    )\))( )\  (    (()/( (  )\))(  (        //
+//      ((_)\ /((_|()\  )\ )      )\  '(()/(   ((_)()((_) )\ )  ((_)))\((_)()\ )\       //
+//      | |(_|_))( ((_)_(_/(    _((_))  )(_))  _(()((_|_)_(_/(  _| |((_)(()((_|(_)      //
+//      | '_ \ || | '_| ' \))  | '  \()| || |  \ V  V / | ' \)) _` / _ \ V  V (_-<      //
+//      |_.__/\_,_|_| |_||_|   |_|_|_|  \_, |   \_/\_/|_|_||_|\__,_\___/\_/\_//__/      //
+//                                 |__/                                                 //
+//////////////////////////////////////////////////////////////////////////////////////////
+
+// SPDX-FileCopyrightText: Justin Garza <JGarza9788@gmail.com>
+// SPDX-FileCopyrightText: Simon Schneegans <code@simonschneegans.de>
+// SPDX-License-Identifier: GPL-3.0-or-later
+
+'use strict';
+
+import * as utils from '../utils.js';
+
+// We import the ShaderFactory only in the Shell process as it is not required in the
+// preferences process. The preferences process does not create any shader instances, it
+// only uses the static metadata of the effect.
+const ShaderFactory = await utils.importInShellOnly('./ShaderFactory.js');
+
+const _ = await utils.importGettext();
+
+//////////////////////////////////////////////////////////////////////////////////////////
+// This effect was inspired by apple's new siri effect.                                 //
+//////////////////////////////////////////////////////////////////////////////////////////
+
+// The effect class can be used to get some metadata (like the effect's name or supported
+// GNOME Shell versions), to initialize the respective page of the settings dialog, as
+// well as to create the actual shader for the effect.
+export default class Effect {
+  // The constructor creates a ShaderFactory which will be used by extension.js to create
+  // shader instances for this effect. The shaders will be automagically created using the
+  // GLSL file in resources/shaders/<nick>.glsl. The callback will be called for each
+  // newly created shader instance.
+
+  constructor() {
+    this.shaderFactory = new ShaderFactory(Effect.getNick(), (shader) => {
+      // Store uniform locations of newly created shaders.
+      shader._uSpeed        = shader.get_uniform_location('uSpeed');
+      shader._uRandomColor  = shader.get_uniform_location('uRandomColor');
+      shader._uStartHue     = shader.get_uniform_location('uStartHue');
+      shader._uSaturation   = shader.get_uniform_location('uSaturation');
+      shader._uEdgeSize     = shader.get_uniform_location('uEdgeSize');
+      shader._uEdgeHardness = shader.get_uniform_location('uEdgeHardness');
+      shader._uBlur         = shader.get_uniform_location('uBlur');
+      shader._uSeed         = shader.get_uniform_location('uSeed');
+
+      // Write all uniform values at the start of each animation.
+      shader.connect('begin-animation', (shader, settings) => {
+        // clang-format off
+        shader.set_uniform_float(shader._uSpeed,        1, [settings.get_double('aura-glow-speed')]);
+        shader.set_uniform_float(shader._uRandomColor, 1, [settings.get_boolean('aura-glow-random-color')]);
+        shader.set_uniform_float(shader._uStartHue,       1, [settings.get_double('aura-glow-start-hue')]);
+        shader.set_uniform_float(shader._uSaturation,   1, [settings.get_double('aura-glow-saturation')]);
+        shader.set_uniform_float(shader._uEdgeSize,          1, [settings.get_double('aura-glow-edge-size')]);
+        shader.set_uniform_float(shader._uEdgeHardness,      1, [settings.get_double('aura-glow-edge-hardness')]);
+        shader.set_uniform_float(shader._uBlur,              1, [settings.get_double('aura-glow-blur')]);
+        shader.set_uniform_float(shader._uSeed,              2, [Math.random(), Math.random()]);
+        // clang-format on
+      });
+    });
+  }
+
+
+
+  // ---------------------------------------------------------------------------- metadata
+
+  // The effect is available on all GNOME Shell versions supported by this extension.
+  static getMinShellVersion() {
+    return [3, 36];
+  }
+
+  // This will be called in various places where a unique identifier for this effect is
+  // required. It should match the prefix of the settings keys which store whether the
+  // effect is enabled currently (e.g. '*-enable-effect'), and its animation time
+  // (e.g. '*-animation-time'). Also, the shader file and the settings UI files should be
+  // named likes this.
+  static getNick() {
+    return 'aura-glow';
+  }
+
+  // This will be shown in the sidebar of the preferences dialog as well as in the
+  // drop-down menus where the user can choose the effect.
+  static getLabel() {
+    return _('Aura Glow');
+  }
+
+  // -------------------------------------------------------------------- API for prefs.js
+
+  // This is called by the preferences dialog whenever a new effect profile is loaded. It
+  // binds all user interface elements to the respective settings keys of the profile.
+  static bindPreferences(dialog) {
+    dialog.bindAdjustment('aura-glow-animation-time');
+    dialog.bindAdjustment('aura-glow-speed');
+    dialog.bindSwitch('aura-glow-random-color');
+    dialog.bindAdjustment('aura-glow-start-hue');
+    dialog.bindAdjustment('aura-glow-saturation');
+    dialog.bindAdjustment('aura-glow-edge-size');
+    dialog.bindAdjustment('aura-glow-edge-hardness');
+    dialog.bindAdjustment('aura-glow-blur');
+
+    // enable and disable the one slider
+    function enableDisablePref(dialog, state) {
+      dialog.getBuilder().get_object('aura-glow-start-hue-slider').set_sensitive(!state);
+    }
+
+    const switchWidget = dialog.getBuilder().get_object('aura-glow-random-color');
+
+    // Connect to the "state-set" signal to update preferences dynamically based on
+    // the switch state.
+    switchWidget.connect('state-set', (widget, state) => {
+      enableDisablePref(dialog, state);  // Update sensitivity when the state changes.
+    });
+
+    // Manually call the update function on startup, using the initial state of the
+    // switch.
+    const initialState =
+      switchWidget.get_active();  // Get the current state of the switch.
+    enableDisablePref(dialog, initialState);
+  }
+
+  // ---------------------------------------------------------------- API for extension.js
+
+  // The getActorScale() is called from extension.js to adjust the actor's size during the
+  // animation. This is useful if the effect requires drawing something beyond the usual
+  // bounds of the actor. This only works for GNOME 3.38+.
+  static getActorScale(settings, forOpening, actor) {
+    return {x: 1.0, y: 1.0};
+  }
+}

releng/airootfs/usr/share/gnome-shell/extensions/burn-my-windows@schneegans.github.com/src/effects/BrokenGlass.js

@@ -20,8 +20,6 @@ import * as utils from '../utils.js';
 // preferences process. They are used only in the creator function of the ShaderFactory
 // which is only called within GNOME Shell's process.
 const ShaderFactory = await utils.importInShellOnly('./ShaderFactory.js');
-const Clutter       = await utils.importInShellOnly('gi://Clutter');
-const GdkPixbuf     = await utils.importInShellOnly('gi://GdkPixbuf');
 const Cogl          = await utils.importInShellOnly('gi://Cogl');
 
 const _ = await utils.importGettext();
@@ -55,11 +53,7 @@ export default class Effect {
     this.shaderFactory = new ShaderFactory(Effect.getNick(), (shader) => {
       // Create the texture in the first call.
       if (!this._shardTexture) {
-        const shardData    = GdkPixbuf.Pixbuf.new_from_resource('/img/shards.png');
+        this._shardTexture = utils.getImageResource('/img/shards.png');
-        this._shardTexture = new Clutter.Image();
-        this._shardTexture.set_data(shardData.get_pixels(), Cogl.PixelFormat.RGB_888,
-                                    shardData.width, shardData.height,
-                                    shardData.rowstride);
       }
 
       // Store all uniform locations.

releng/airootfs/usr/share/gnome-shell/extensions/burn-my-windows@schneegans.github.com/src/effects/Fire.js

@@ -12,6 +12,8 @@
 // SPDX-FileCopyrightText: Simon Schneegans <code@simonschneegans.de>
 // SPDX-License-Identifier: GPL-3.0-or-later
 
+// modified by Justin Garza <JGarza9788@gmail.com>
+
 'use strict';
 
 import Gio from 'gi://Gio';
@@ -58,6 +60,9 @@ export default class Effect {
       shader._uScale         = shader.get_uniform_location('uScale');
       shader._uMovementSpeed = shader.get_uniform_location('uMovementSpeed');
 
+      shader._uRandomColor = shader.get_uniform_location('uRandomColor');
+      shader._uSeed        = shader.get_uniform_location('uSeed');
+
       // And update all uniforms at the start of each animation.
       shader.connect('begin-animation', (shader, settings) => {
         for (let i = 1; i <= 5; i++) {
@@ -68,6 +73,8 @@ export default class Effect {
 
         // clang-format off
         shader.set_uniform_float(shader._u3DNoise,       1, [settings.get_boolean('fire-3d-noise')]);
+        shader.set_uniform_float(shader._uRandomColor,   1, [settings.get_boolean('fire-random-color')]);
+        shader.set_uniform_float(shader._uSeed,          1, [Math.random()]);
         shader.set_uniform_float(shader._uScale,         1, [settings.get_double('fire-scale')]);
         shader.set_uniform_float(shader._uMovementSpeed, 1, [settings.get_double('fire-movement-speed')]);
         // clang-format on
@@ -107,6 +114,7 @@ export default class Effect {
     dialog.bindAdjustment('fire-movement-speed');
     dialog.bindAdjustment('fire-scale');
     dialog.bindSwitch('fire-3d-noise');
+    dialog.bindSwitch('fire-random-color');
     dialog.bindColorButton('fire-color-1');
     dialog.bindColorButton('fire-color-2');
     dialog.bindColorButton('fire-color-3');
@@ -129,6 +137,33 @@ export default class Effect {
       // Initialize the fire-preset dropdown.
       Effect._createFirePresets(dialog);
     }
+
+    // enables and disables the color buttons
+    function enableDisableColorButtons(dialog, state) {
+
+      for (let i = 1; i <= 5; i++) {
+        dialog.getBuilder().get_object('fire-color-' + i).set_sensitive(!state);
+      }
+    }
+
+    const switchWidget = dialog.getBuilder().get_object('fire-random-color');
+    if (switchWidget) {
+      // Connect to the "state-set" signal to update preferences dynamically based on
+      // the switch state.
+      switchWidget.connect('state-set', (widget, state) => {
+        enableDisableColorButtons(dialog,
+                                  state);  // Update sensitivity when the state changes.
+      });
+
+      // Manually call the update function on startup, using the initial state of the
+      // switch.
+      const initialState =
+        switchWidget.get_active();  // Get the current state of the switch.
+      enableDisableColorButtons(dialog, initialState);
+    } else {
+      // Log an error if the switch widget is not found in the UI.
+      log('Error: \'fire-random-color\' switch widget not found.');
+    }
   }
 
   // ---------------------------------------------------------------- API for extension.js
@@ -195,12 +230,23 @@ export default class Effect {
           color3: 'rgba(207,235,255,0.84)',
           color4: 'rgb(208,243,255)',
           color5: 'rgb(255,255,255)'
+        },
+        // i don't think he'll notice if i sneak this in
+        {
+          name: _('Nuclear ☢️'),
+          scale: 1.5,
+          speed: 0.5,
+          color1: 'rgba(0,0,0,0)',
+          color2: 'rgba(2, 40, 0, 0.3)',
+          color3: 'rgba(0, 200, 50, 0.9)',
+          color4: 'rgba(255, 255, 0, 1.0)',
+          color5: 'rgba(255, 255, 255, 1.0)'
         }
       ];
 
       const menu      = Gio.Menu.new();
       const group     = Gio.SimpleActionGroup.new();
-      const groupName = 'presets';
+      const groupName = 'fire-presets';
 
       // Add all presets.
       presets.forEach((preset, i) => {

releng/airootfs/usr/share/gnome-shell/extensions/burn-my-windows@schneegans.github.com/src/effects/Matrix.js

@@ -20,9 +20,6 @@ import * as utils from '../utils.js';
 // preferences process. They are used only in the creator function of the ShaderFactory
 // which is only called within GNOME Shell's process.
 const ShaderFactory = await utils.importInShellOnly('./ShaderFactory.js');
-const Clutter       = await utils.importInShellOnly('gi://Clutter');
-const GdkPixbuf     = await utils.importInShellOnly('gi://GdkPixbuf');
-const Cogl          = await utils.importInShellOnly('gi://Cogl');
 
 const _ = await utils.importGettext();
 
@@ -47,12 +44,7 @@ export default class Effect {
     this.shaderFactory = new ShaderFactory(Effect.getNick(), (shader) => {
       // Create the texture in the first call.
       if (!this._fontTexture) {
-        const fontData    = GdkPixbuf.Pixbuf.new_from_resource('/img/matrixFont.png');
+        this._fontTexture = utils.getImageResource('/img/matrixFont.png');
-        this._fontTexture = new Clutter.Image();
-        this._fontTexture.set_data(
-          fontData.get_pixels(),
-          fontData.has_alpha ? Cogl.PixelFormat.RGBA_8888 : Cogl.PixelFormat.RGB_888,
-          fontData.width, fontData.height, fontData.rowstride);
       }
 
       // Store uniform locations of newly created shaders.

releng/airootfs/usr/share/gnome-shell/extensions/burn-my-windows@schneegans.github.com/src/effects/Mushroom.js

@@ -0,0 +1,384 @@
+//////////////////////////////////////////////////////////////////////////////////////////
+//          )                                                   (                       //
+//       ( /(   (  (               )    (       (  (  (         )\ )    (  (            //
+//       )\()) ))\ )(   (         (     )\ )    )\))( )\  (    (()/( (  )\))(  (        //
+//      ((_)\ /((_|()\  )\ )      )\  '(()/(   ((_)()((_) )\ )  ((_)))\((_)()\ )\       //
+//      | |(_|_))( ((_)_(_/(    _((_))  )(_))  _(()((_|_)_(_/(  _| |((_)(()((_|(_)      //
+//      | '_ \ || | '_| ' \))  | '  \()| || |  \ V  V / | ' \)) _` / _ \ V  V (_-<      //
+//      |_.__/\_,_|_| |_||_|   |_|_|_|  \_, |   \_/\_/|_|_||_|\__,_\___/\_/\_//__/      //
+//                                 |__/                                                 //
+//////////////////////////////////////////////////////////////////////////////////////////
+
+// SPDX-FileCopyrightText: Justin Garza JGarza9788@gmail.com
+// SPDX-License-Identifier: GPL-3.0-or-later
+
+'use strict';
+
+// Import the Gio module from the GNOME platform (GObject Introspection).
+// This module provides APIs for I/O operations, settings management, and other core
+// features.
+import Gio from 'gi://Gio';
+
+// Import utility functions from the local utils.js file.
+// These utilities likely contain helper functions or shared logic used across the
+// application.
+import * as utils from '../utils.js';
+
+// We import the ShaderFactory only in the Shell process as it is not required in the
+// preferences process. The preferences process does not create any shader instances, it
+// only uses the static metadata of the effect.
+const ShaderFactory = await utils.importInShellOnly('./ShaderFactory.js');
+
+const _ = await utils.importGettext();
+
+//////////////////////////////////////////////////////////////////////////////////////////
+// This effect is inspired by the old 8bit mario video games and the New Super Mario //
+// Bros 2 specifically when mario gets the mushroom. i hope you enjoy this little blast //
+// from the past. //
+//////////////////////////////////////////////////////////////////////////////////////////
+
+// The effect class can be used to get some metadata (like the effect's name or supported
+// GNOME Shell versions), to initialize the respective page of the settings dialog, as
+// well as to create the actual shader for the effect.
+export default class Effect {
+  // The constructor creates a ShaderFactory which will be used by extension.js to create
+  // shader instances for this effect. The shaders will be automagically created using the
+  // GLSL file in resources/shaders/<nick>.glsl. The callback will be called for each
+  // newly created shader instance.
+  constructor() {
+    this.shaderFactory = new ShaderFactory(Effect.getNick(), (shader) => {
+      // very basic effect... so nothing here
+
+      shader._uGradient = [
+        shader.get_uniform_location('uStarColor0'),
+        shader.get_uniform_location('uStarColor1'),
+        shader.get_uniform_location('uStarColor2'),
+        shader.get_uniform_location('uStarColor3'),
+        shader.get_uniform_location('uStarColor4'),
+        shader.get_uniform_location('uStarColor5'),
+      ];
+
+
+      shader._uScaleStyle = shader.get_uniform_location('uScaleStyle');
+
+      shader._uSparkCount    = shader.get_uniform_location('uSparkCount');
+      shader._uSparkColor    = shader.get_uniform_location('uSparkColor');
+      shader._uSparkRotation = shader.get_uniform_location('uSparkRotation');
+
+      shader._uRaysColor = shader.get_uniform_location('uRaysColor');
+
+      shader._uRingCount    = shader.get_uniform_location('uRingCount');
+      shader._uRingRotation = shader.get_uniform_location('uRingRotation');
+      shader._uStarCount    = shader.get_uniform_location('uStarCount');
+
+      shader._uSeed = shader.get_uniform_location('uSeed');
+
+      // And update all uniforms at the start of each animation.
+      shader.connect('begin-animation', (shader, settings) => {
+        for (let i = 0; i <= 5; i++) {
+          shader.set_uniform_float(
+            shader._uGradient[i], 4,
+            utils.parseColor(settings.get_string('mushroom-star-color-' + i)));
+        }
+
+        // clang-format off
+        shader.set_uniform_float(shader._uScaleStyle,    1, [settings.get_double('mushroom-scale-style')]);
+        shader.set_uniform_float(shader._uSparkCount,    1, [settings.get_int('mushroom-spark-count')]);
+        shader.set_uniform_float(shader._uSparkColor,    4, utils.parseColor(settings.get_string('mushroom-spark-color')));
+        shader.set_uniform_float(shader._uSparkRotation, 1, [settings.get_double('mushroom-spark-rotation')]);
+        shader.set_uniform_float(shader._uRaysColor,     4, utils.parseColor(settings.get_string('mushroom-rays-color')));
+        shader.set_uniform_float(shader._uRingCount,     1, [settings.get_int('mushroom-ring-count')]);
+        shader.set_uniform_float(shader._uRingRotation,  1, [settings.get_double('mushroom-ring-rotation')]);
+        shader.set_uniform_float(shader._uStarCount,     1, [settings.get_int('mushroom-star-count')]);
+
+        shader.set_uniform_float(shader._uSeed,  2, [Math.random(), Math.random()]);
+        // clang-format on
+      });
+    });
+  }
+
+  // ---------------------------------------------------------------------------- metadata
+
+  // The effect is available on all GNOME Shell versions supported by this extension.
+  static getMinShellVersion() {
+    return [3, 36];
+  }
+
+  // This will be called in various places where a unique identifier for this effect is
+  // required. It should match the prefix of the settings keys which store whether the
+  // effect is enabled currently (e.g. '*-enable-effect'), and its animation time
+  // (e.g. '*-animation-time'). Also, the shader file and the settings UI files should be
+  // named likes this.
+  static getNick() {
+    return 'mushroom';
+  }
+
+  // This will be shown in the sidebar of the preferences dialog as well as in the
+  // drop-down menus where the user can choose the effect.
+  static getLabel() {
+    return _('Mushroom');
+  }
+
+  // -------------------------------------------------------------------- API for prefs.js
+
+  // This is called by the preferences dialog whenever a new effect profile is loaded. It
+  // binds all user interface elements to the respective settings keys of the profile.
+  static bindPreferences(dialog) {
+    // Empty for now... Code is added here later in the tutorial!
+    dialog.bindAdjustment('mushroom-animation-time');
+    // dialog.bindSwitch('mushroom-8bit-enable');
+
+    dialog.bindAdjustment('mushroom-scale-style');
+
+    dialog.bindAdjustment('mushroom-spark-count');
+    dialog.bindColorButton('mushroom-spark-color');
+    dialog.bindAdjustment('mushroom-spark-rotation');
+
+    dialog.bindColorButton('mushroom-rays-color');
+
+    dialog.bindAdjustment('mushroom-ring-count');
+    dialog.bindAdjustment('mushroom-ring-rotation');
+    dialog.bindAdjustment('mushroom-star-count');
+
+    dialog.bindColorButton('mushroom-star-color-0');
+    dialog.bindColorButton('mushroom-star-color-1');
+    dialog.bindColorButton('mushroom-star-color-2');
+    dialog.bindColorButton('mushroom-star-color-3');
+    dialog.bindColorButton('mushroom-star-color-4');
+    dialog.bindColorButton('mushroom-star-color-5');
+
+
+    // Ensure the button connections and other bindings happen only once,
+    // even if the bindPreferences function is called multiple times.
+    if (!Effect._isConnected) {
+      Effect._isConnected = true;
+
+      // Bind the "reset-star-colors" button to reset all star colors to their default
+      // values.
+      dialog.getBuilder().get_object('reset-star-colors').connect('clicked', () => {
+        // Reset each mushroom star color setting.
+        dialog.getProfileSettings().reset('mushroom-star-color-0');
+        dialog.getProfileSettings().reset('mushroom-star-color-1');
+        dialog.getProfileSettings().reset('mushroom-star-color-2');
+        dialog.getProfileSettings().reset('mushroom-star-color-3');
+        dialog.getProfileSettings().reset('mushroom-star-color-4');
+        dialog.getProfileSettings().reset('mushroom-star-color-5');
+      });
+
+
+      // Initialize the preset dropdown menu for mushroom star colors.
+      Effect._createMushroomPresets(dialog);
+    }
+  }
+
+  // ---------------------------------------------------------------- API for extension.js
+
+  // The getActorScale() is called from extension.js to adjust the actor's size during the
+  // animation. This is useful if the effect requires drawing something beyond the usual
+  // bounds of the actor. This only works for GNOME 3.38+.
+  static getActorScale(settings, forOpening, actor) {
+    return {x: 1.0, y: 1.0};
+  }
+
+  // ---------------------------------------------------------------- Presets
+
+  // This function initializes the preset dropdown menu for configuring fire options.
+  // It defines multiple color presets for the "mushroom star" effect and sets up
+  // the logic to apply these presets when selected.
+
+  static _createMushroomPresets(dialog) {
+    // Retrieve the builder object for the dialog and connect to the "realize" event of
+    // the button.
+    dialog.getBuilder()
+      .get_object('mushroom-star-color-preset-button')
+      .connect('realize', (widget) => {
+        // Define an array of color presets, each with a name and six color values (RGBA
+        // format).
+        const presets = [
+          {
+            name: _('8Bit Plumber'),
+            ScaleStyle: 0.0,
+            SparkCount: 0,
+            SparkColor: 'rgba(255,255,255,0.0)',
+            SparkRotation: 0.33,
+            RayColor: 'rgba(255,255,255,0.0)',
+            RingCount: 0,
+            RingRotation: 0.0,
+            StarCount: 0,
+            color0: 'rgba(233,249,0,1.0)',
+            color1: 'rgba(233,249,0,1.0)',
+            color2: 'rgba(91,255,0,1.0)',
+            color3: 'rgba(91,255,0,1.0)',
+            color4: 'rgba(0,240,236,1.0)',
+            color5: 'rgba(0,240,236,1.0)',
+          },
+          {
+            name: _('New Bros 2 🍄'),
+            ScaleStyle: 1.0,
+            SparkCount: 4,
+            SparkColor: 'rgba(255,255,255,1.0)',
+            SparkRotation: 0.3,
+            RayColor: 'rgba(255,255,255,1.0)',
+            RingCount: 3,
+            RingRotation: 1.33,
+            StarCount: 5,
+            color0: 'rgba(233,249,0,1.0)',
+            color1: 'rgba(233,249,0,1.0)',
+            color2: 'rgba(91,255,0,1.0)',
+            color3: 'rgba(91,255,0,1.0)',
+            color4: 'rgba(0,240,236,1.0)',
+            color5: 'rgba(0,240,236,1.0)',
+          },
+          {
+            name:
+              _('Red White and Blue 🇺🇸'),  // A patriotic palette of red, white, and blue
+            ScaleStyle: 1.0,
+            SparkCount: 4,
+            SparkColor: 'rgba(255,255,255,1.0)',
+            SparkRotation: 0.3,
+            RayColor: 'rgba(255,255,255,0.0)',
+            RingCount: 3,
+            RingRotation: 1.33,
+            StarCount: 5,
+            color0: 'rgba(255, 0, 0, 1.0)',
+            color1: 'rgba(255, 0, 0, 1.0)',
+            color2: 'rgba(255,255,255, 1.0)',
+            color3: 'rgba(255,255,255, 1.0)',
+            color4: 'rgba(0,0,255, 1.0)',
+            color5: 'rgba(0,0,255, 1.0)'
+          },
+          {
+            name: _('Rainbow 🌈'),  // A vivid rainbow spectrum of colors
+            ScaleStyle: 1.0,
+            SparkCount: 4,
+            SparkColor: 'rgba(255,255,255,1.0)',
+            SparkRotation: 0.3,
+            RayColor: 'rgba(255,255,255,0.0)',
+            RingCount: 3,
+            RingRotation: 2.0,
+            StarCount: 7,
+            color0: 'rgba(255, 69, 58, 1.0)',   // Bold Red
+            color1: 'rgba(255, 140, 0, 1.0)',   // Bold Orange
+            color2: 'rgba(255, 223, 0, 1.0)',   // Bold Yellow
+            color3: 'rgba(50, 205, 50, 1.0)',   // Bold Green
+            color4: 'rgba(30, 144, 255, 1.0)',  // Bold Blue
+            color5: 'rgba(148, 0, 211, 1.0)'    // Bold Purple
+          },
+          {
+            name: _('Cattuccino 😺'),  // A soft pastel palette inspired by a
+                                       // cappuccino theme
+            ScaleStyle: 1.0,
+            SparkCount: 4,
+            SparkColor: 'rgba(255,255,255,1.0)',
+            SparkRotation: 0.3,
+            RayColor: 'rgba(255,255,255,0.0)',
+            RingCount: 3,
+            RingRotation: 2.0,
+            StarCount: 7,
+            color0: 'rgba(239, 146, 160, 1.0)',
+            color1: 'rgba(246, 178, 138, 1.0)',
+            color2: 'rgba(240, 217, 169, 1.0)',
+            color3: 'rgba(175, 223, 159, 1.0)',
+            color4: 'rgba(149, 182, 246, 1.0)',
+            color5: 'rgba(205, 170, 247, 1.0)'
+          },
+          {
+            name: _('Dracula 🦇'),  // A dark palette inspired by the Dracula theme
+            ScaleStyle: 1.0,
+            SparkCount: 0,
+            SparkColor: 'rgba(255,255,255,1.0)',
+            SparkRotation: 0.3,
+            RayColor: 'rgba(255,255,255,0.0)',
+            RingCount: 3,
+            RingRotation: 2.0,
+            StarCount: 7,
+            color0: 'rgba(40, 42, 54, 1.0)',   // Dark Grey
+            color1: 'rgba(68, 71, 90, 1.0)',   // Medium Grey
+            color2: 'rgba(90, 94, 119, 1.0)',  // Light Grey
+            color3: 'rgba(90, 94, 119, 1.0)',  // Light Grey
+            color4: 'rgba(68, 71, 90, 1.0)',   // Medium Grey
+            color5: 'rgba(40, 42, 54, 1.0)'    // Dark Grey
+          },
+          {
+            name: _('Sparkle ✨'),  // A dark palette inspired by the Dracula theme
+            ScaleStyle: 1.0,
+            SparkCount: 25,
+            SparkColor: 'rgba(255,255,255,1.0)',
+            SparkRotation: 0.3,
+            RayColor: 'rgba(255,255,255,0.0)',
+            RingCount: 0,
+            RingRotation: 1.33,
+            StarCount: 7,
+            color0: 'rgba(255,255,255,0.0)',
+            color1: 'rgba(255,255,255,0.0)',
+            color2: 'rgba(255,255,255,0.0)',
+            color3: 'rgba(255,255,255,0.0)',
+            color4: 'rgba(255,255,255,0.0)',
+            color5: 'rgba(255,255,255,0.0)',
+          }
+        ];
+
+        // Create a new menu model to hold the presets and an action group for handling
+        // selections.
+        const menu      = Gio.Menu.new();
+        const group     = Gio.SimpleActionGroup.new();
+        const groupName = 'mushroom-presets';
+
+        // Iterate over the presets to populate the menu.
+        presets.forEach((preset, i) => {
+          // Define an action name based on the preset index.
+          const actionName = 'mushroom' + i;
+
+          // Append the preset name to the menu.
+          menu.append(preset.name, groupName + '.' + actionName);
+
+          // Create a new action for the preset.
+          let action = Gio.SimpleAction.new(actionName, null);
+
+          // Connect the action to a function that loads the preset colors into the
+          // dialog.
+          action.connect('activate', () => {
+            dialog.getProfileSettings().set_double('mushroom-scale-style',
+                                                   preset.ScaleStyle);
+            dialog.getProfileSettings().set_int('mushroom-spark-count',
+                                                preset.SparkCount);
+            dialog.getProfileSettings().set_string('mushroom-spark-color',
+                                                   preset.SparkColor);
+            dialog.getProfileSettings().set_double('mushroom-spark-rotation',
+                                                   preset.SparkRotation);
+            dialog.getProfileSettings().set_string('mushroom-rays-color',
+                                                   preset.RayColor);
+            dialog.getProfileSettings().set_int('mushroom-ring-count', preset.RingCount);
+            dialog.getProfileSettings().set_double('mushroom-ring-rotation',
+                                                   preset.RingRotation);
+            dialog.getProfileSettings().set_int('mushroom-star-count', preset.StarCount);
+
+            dialog.getProfileSettings().set_string('mushroom-star-color-0',
+                                                   preset.color0);
+            dialog.getProfileSettings().set_string('mushroom-star-color-1',
+                                                   preset.color1);
+            dialog.getProfileSettings().set_string('mushroom-star-color-2',
+                                                   preset.color2);
+            dialog.getProfileSettings().set_string('mushroom-star-color-3',
+                                                   preset.color3);
+            dialog.getProfileSettings().set_string('mushroom-star-color-4',
+                                                   preset.color4);
+            dialog.getProfileSettings().set_string('mushroom-star-color-5',
+                                                   preset.color5);
+          });
+
+          // Add the action to the action group.
+          group.add_action(action);
+        });
+
+        // Assign the populated menu to the preset button.
+        dialog.getBuilder()
+          .get_object('mushroom-star-color-preset-button')
+          .set_menu_model(menu);
+
+        // Insert the action group into the root widget for handling the presets.
+        const root = widget.get_root();
+        root.insert_action_group(groupName, group);
+      });
+  }
+}

releng/airootfs/usr/share/gnome-shell/extensions/burn-my-windows@schneegans.github.com/src/effects/PaintBrush.js

@@ -20,8 +20,6 @@ import * as utils from '../utils.js';
 // preferences process. They are used only in the creator function of the ShaderFactory
 // which is only called within GNOME Shell's process.
 const ShaderFactory = await utils.importInShellOnly('./ShaderFactory.js');
-const Clutter       = await utils.importInShellOnly('gi://Clutter');
-const GdkPixbuf     = await utils.importInShellOnly('gi://GdkPixbuf');
 const Cogl          = await utils.importInShellOnly('gi://Cogl');
 
 const _ = await utils.importGettext();
@@ -45,11 +43,7 @@ export default class Effect {
     this.shaderFactory = new ShaderFactory(Effect.getNick(), (shader) => {
       // Create the texture in the first call.
       if (!this._brushTexture) {
-        const brushData    = GdkPixbuf.Pixbuf.new_from_resource('/img/brush.png');
+        this._brushTexture = utils.getImageResource('/img/brush.png', true);
-        this._brushTexture = new Clutter.Image();
-        this._brushTexture.set_data(brushData.get_pixels(),
-                                    Cogl.PixelFormat.RGBA_8888_PRE, brushData.width,
-                                    brushData.height, brushData.rowstride);
       }
 
       // Store uniform locations of newly created shaders.

releng/airootfs/usr/share/gnome-shell/extensions/burn-my-windows@schneegans.github.com/src/effects/RGBWarp.js

@@ -0,0 +1,100 @@
+//////////////////////////////////////////////////////////////////////////////////////////
+//          )                                                   (                       //
+//       ( /(   (  (               )    (       (  (  (         )\ )    (  (            //
+//       )\()) ))\ )(   (         (     )\ )    )\))( )\  (    (()/( (  )\))(  (        //
+//      ((_)\ /((_|()\  )\ )      )\  '(()/(   ((_)()((_) )\ )  ((_)))\((_)()\ )\       //
+//      | |(_|_))( ((_)_(_/(    _((_))  )(_))  _(()((_|_)_(_/(  _| |((_)(()((_|(_)      //
+//      | '_ \ || | '_| ' \))  | '  \()| || |  \ V  V / | ' \)) _` / _ \ V  V (_-<      //
+//      |_.__/\_,_|_| |_||_|   |_|_|_|  \_, |   \_/\_/|_|_||_|\__,_\___/\_/\_//__/      //
+//                                 |__/                                                 //
+//////////////////////////////////////////////////////////////////////////////////////////
+
+// SPDX-FileCopyrightText: Justin Garza JGarza9788@gmail.com
+// SPDX-License-Identifier: GPL-3.0-or-later
+
+'use strict';
+
+import * as utils from '../utils.js';
+
+// We import the ShaderFactory only in the Shell process as it is not required in the
+// preferences process. The preferences process does not create any shader instances, it
+// only uses the static metadata of the effect.
+const ShaderFactory = await utils.importInShellOnly('./ShaderFactory.js');
+
+const _ = await utils.importGettext();
+
+//////////////////////////////////////////////////////////////////////////////////////////
+// This effect warps the Red Green Blue values                                          //
+//////////////////////////////////////////////////////////////////////////////////////////
+
+// The effect class can be used to get some metadata (like the effect's name or supported
+// GNOME Shell versions), to initialize the respective page of the settings dialog, as
+// well as to create the actual shader for the effect.
+export default class Effect {
+  // The constructor creates a ShaderFactory which will be used by extension.js to create
+  // shader instances for this effect. The shaders will be automagically created using the
+  // GLSL file in resources/shaders/<nick>.glsl. The callback will be called for each
+  // newly created shader instance.
+  constructor() {
+    this.shaderFactory = new ShaderFactory(Effect.getNick(), (shader) => {
+      // Store uniform locations of newly created shaders.
+      shader._uBrightness = shader.get_uniform_location('uBrightness');
+      shader._uSpeedR     = shader.get_uniform_location('uSpeedR');
+      shader._uSpeedG     = shader.get_uniform_location('uSpeedG');
+      shader._uSpeedB     = shader.get_uniform_location('uSpeedB');
+
+      // Write all uniform values at the start of each animation.
+      shader.connect('begin-animation', (shader, settings) => {
+        // clang-format off
+        shader.set_uniform_float(shader._uBrightness, 1, [settings.get_double('rgbwarp-brightness')]);
+        shader.set_uniform_float(shader._uSpeedR,     1, [settings.get_double('rgbwarp-speed-r')]);
+        shader.set_uniform_float(shader._uSpeedG,     1, [settings.get_double('rgbwarp-speed-g')]);
+        shader.set_uniform_float(shader._uSpeedB,     1, [settings.get_double('rgbwarp-speed-b')]);
+        // clang-format on
+      });
+    });
+  }
+
+  // ---------------------------------------------------------------------------- metadata
+
+  // The effect is available on all GNOME Shell versions supported by this extension.
+  static getMinShellVersion() {
+    return [3, 36];
+  }
+
+  // This will be called in various places where a unique identifier for this effect is
+  // required. It should match the prefix of the settings keys which store whether the
+  // effect is enabled currently (e.g. '*-enable-effect'), and its animation time
+  // (e.g. '*-animation-time'). Also, the shader file and the settings UI files should be
+  // named likes this.
+  static getNick() {
+    return 'rgbwarp';
+  }
+
+  // This will be shown in the sidebar of the preferences dialog as well as in the
+  // drop-down menus where the user can choose the effect.
+  static getLabel() {
+    return _('RGB Warp');
+  }
+
+  // -------------------------------------------------------------------- API for prefs.js
+
+  // This is called by the preferences dialog whenever a new effect profile is loaded. It
+  // binds all user interface elements to the respective settings keys of the profile.
+  static bindPreferences(dialog) {
+    dialog.bindAdjustment('rgbwarp-animation-time');
+    dialog.bindAdjustment('rgbwarp-brightness');
+    dialog.bindAdjustment('rgbwarp-speed-r');
+    dialog.bindAdjustment('rgbwarp-speed-g');
+    dialog.bindAdjustment('rgbwarp-speed-b');
+  }
+
+  // ---------------------------------------------------------------- API for extension.js
+
+  // The getActorScale() is called from extension.js to adjust the actor's size during the
+  // animation. This is useful if the effect requires drawing something beyond the usual
+  // bounds of the actor. This only works for GNOME 3.38+.
+  static getActorScale(settings, forOpening, actor) {
+    return {x: 1.0, y: 1.0};
+  }
+}

releng/airootfs/usr/share/gnome-shell/extensions/burn-my-windows@schneegans.github.com/src/effects/SnapOfDisintegration.js

@@ -20,8 +20,6 @@ import * as utils from '../utils.js';
 // preferences process. They are used only in the creator function of the ShaderFactory
 // which is only called within GNOME Shell's process.
 const ShaderFactory = await utils.importInShellOnly('./ShaderFactory.js');
-const Clutter       = await utils.importInShellOnly('gi://Clutter');
-const GdkPixbuf     = await utils.importInShellOnly('gi://GdkPixbuf');
 const Cogl          = await utils.importInShellOnly('gi://Cogl');
 
 const _ = await utils.importGettext();
@@ -49,10 +47,7 @@ export default class Effect {
     this.shaderFactory = new ShaderFactory(Effect.getNick(), (shader) => {
       // Create the texture in the first call.
       if (!this._dustTexture) {
-        const dustData    = GdkPixbuf.Pixbuf.new_from_resource('/img/dust.png');
+        this._dustTexture = utils.getImageResource('/img/dust.png');
-        this._dustTexture = new Clutter.Image();
-        this._dustTexture.set_data(dustData.get_pixels(), Cogl.PixelFormat.RGB_888,
-                                   dustData.width, dustData.height, dustData.rowstride);
       }
 
       // Store uniform locations of newly created shaders.

releng/airootfs/usr/share/gnome-shell/extensions/burn-my-windows@schneegans.github.com/src/effects/TRexAttack.js

@@ -20,8 +20,6 @@ import * as utils from '../utils.js';
 // preferences process. They are used only in the creator function of the ShaderFactory
 // which is only called within GNOME Shell's process.
 const ShaderFactory = await utils.importInShellOnly('./ShaderFactory.js');
-const Clutter       = await utils.importInShellOnly('gi://Clutter');
-const GdkPixbuf     = await utils.importInShellOnly('gi://GdkPixbuf');
 const Cogl          = await utils.importInShellOnly('gi://Cogl');
 
 const _ = await utils.importGettext();
@@ -45,10 +43,7 @@ export default class Effect {
     this.shaderFactory = new ShaderFactory(Effect.getNick(), (shader) => {
       // Create the texture in the first call.
       if (!this._clawTexture) {
-        const clawData    = GdkPixbuf.Pixbuf.new_from_resource('/img/claws.png');
+        this._clawTexture = utils.getImageResource('/img/claws.png');
-        this._clawTexture = new Clutter.Image();
-        this._clawTexture.set_data(clawData.get_pixels(), Cogl.PixelFormat.RGB_888,
-                                   clawData.width, clawData.height, clawData.rowstride);
       }
 
       // Store uniform locations of newly created shaders.

releng/airootfs/usr/share/gnome-shell/extensions/burn-my-windows@schneegans.github.com/src/effects/TeamRocket.js

@@ -0,0 +1,114 @@
+//////////////////////////////////////////////////////////////////////////////////////////
+//          )                                                   (                       //
+//       ( /(   (  (               )    (       (  (  (         )\ )    (  (            //
+//       )\()) ))\ )(   (         (     )\ )    )\))( )\  (    (()/( (  )\))(  (        //
+//      ((_)\ /((_|()\  )\ )      )\  '(()/(   ((_)()((_) )\ )  ((_)))\((_)()\ )\       //
+//      | |(_|_))( ((_)_(_/(    _((_))  )(_))  _(()((_|_)_(_/(  _| |((_)(()((_|(_)      //
+//      | '_ \ || | '_| ' \))  | '  \()| || |  \ V  V / | ' \)) _` / _ \ V  V (_-<      //
+//      |_.__/\_,_|_| |_||_|   |_|_|_|  \_, |   \_/\_/|_|_||_|\__,_\___/\_/\_//__/      //
+//                                 |__/                                                 //
+//////////////////////////////////////////////////////////////////////////////////////////
+
+// SPDX-FileCopyrightText: Justin Garza JGarza9788@gmail.com
+// SPDX-License-Identifier: GPL-3.0-or-later
+
+'use strict';
+
+import * as utils from '../utils.js';
+
+// We import the ShaderFactory only in the Shell process as it is not required in the
+// preferences process. The preferences process does not create any shader instances, it
+// only uses the static metadata of the effect.
+const ShaderFactory = await utils.importInShellOnly('./ShaderFactory.js');
+
+const _ = await utils.importGettext();
+
+//////////////////////////////////////////////////////////////////////////////////////////
+// This effect was inspired by Team Rocket Blasting Off again!                          //
+// https://c.tenor.com/0ag0MVXUaQEAAAAd/tenor.gif                                       //
+//////////////////////////////////////////////////////////////////////////////////////////
+
+// The effect class can be used to get some metadata (like the effect's name or supported
+// GNOME Shell versions), to initialize the respective page of the settings dialog, as
+// well as to create the actual shader for the effect.
+export default class Effect {
+  // The constructor creates a ShaderFactory which will be used by extension.js to create
+  // shader instances for this effect. The shaders will be automagically created using the
+  // GLSL file in resources/shaders/<nick>.glsl. The callback will be called for each
+  // newly created shader instance.
+  constructor() {
+    this.shaderFactory = new ShaderFactory(Effect.getNick(), (shader) => {
+      // Store uniform locations of newly created shaders.
+      shader._uAnimationSplit = shader.get_uniform_location('uAnimationSplit');
+      shader._uHorizontalSparklePosition =
+        shader.get_uniform_location('uHorizontalSparklePosition');
+      shader._uVerticalSparklePosition =
+        shader.get_uniform_location('uVerticalSparklePosition');
+      shader._uWindowRotation = shader.get_uniform_location('uWindowRotation');
+      shader._uSparkleRot     = shader.get_uniform_location('uSparkleRot');
+      shader._uSparkleSize    = shader.get_uniform_location('uSparkleSize');
+
+      shader._uSeed = shader.get_uniform_location('uSeed');
+
+      // Write all uniform values at the start of each animation.
+      shader.connect('begin-animation', (shader, settings) => {
+        // clang-format off
+        shader.set_uniform_float(shader._uAnimationSplit,            1, [settings.get_double('team-rocket-animation-split')]);
+        shader.set_uniform_float(shader._uHorizontalSparklePosition, 1, [settings.get_double('team-rocket-horizontal-sparkle-position')]);
+        shader.set_uniform_float(shader._uVerticalSparklePosition,   1, [settings.get_double('team-rocket-vertical-sparkle-position')]);
+        shader.set_uniform_float(shader._uWindowRotation,            1, [settings.get_boolean('team-rocket-window-rotation')]);
+        shader.set_uniform_float(shader._uSparkleRot,  1, [settings.get_double('team-rocket-sparkle-rot')]);
+        shader.set_uniform_float(shader._uSparkleSize, 1, [settings.get_double('team-rocket-sparkle-size')]);
+        // clang-format on
+
+        // This will be used with a hash function to get a random number.
+        shader.set_uniform_float(shader._uSeed, 2, [Math.random(), Math.random()]);
+      });
+    });
+  }
+
+  // ---------------------------------------------------------------------------- metadata
+
+  // The effect is available on all GNOME Shell versions supported by this extension.
+  static getMinShellVersion() {
+    return [3, 36];
+  }
+
+  // This will be called in various places where a unique identifier for this effect is
+  // required. It should match the prefix of the settings keys which store whether the
+  // effect is enabled currently (e.g. '*-enable-effect'), and its animation time
+  // (e.g. '*-animation-time'). Also, the shader file and the settings UI files should be
+  // named likes this.
+  static getNick() {
+    return 'team-rocket';
+  }
+
+  // This will be shown in the sidebar of the preferences dialog as well as in the
+  // drop-down menus where the user can choose the effect.
+  static getLabel() {
+    return _('Team Rocket');
+  }
+
+  // -------------------------------------------------------------------- API for prefs.js
+
+  // This is called by the preferences dialog whenever a new effect profile is loaded. It
+  // binds all user interface elements to the respective settings keys of the profile.
+  static bindPreferences(dialog) {
+    dialog.bindAdjustment('team-rocket-animation-time');
+    dialog.bindAdjustment('team-rocket-animation-split');
+    dialog.bindAdjustment('team-rocket-horizontal-sparkle-position');
+    dialog.bindAdjustment('team-rocket-vertical-sparkle-position');
+    dialog.bindSwitch('team-rocket-window-rotation');
+    dialog.bindAdjustment('team-rocket-sparkle-rot');
+    dialog.bindAdjustment('team-rocket-sparkle-size');
+  }
+
+  // ---------------------------------------------------------------- API for extension.js
+
+  // The getActorScale() is called from extension.js to adjust the actor's size during the
+  // animation. This is useful if the effect requires drawing something beyond the usual
+  // bounds of the actor. This only works for GNOME 3.38+.
+  static getActorScale(settings, forOpening, actor) {
+    return {x: 1.0, y: 1.0};
+  }
+}

releng/airootfs/usr/share/gnome-shell/extensions/burn-my-windows@schneegans.github.com/src/utils.js

@@ -20,8 +20,10 @@ import GLib from 'gi://GLib';
 // We import some modules optionally. This file is used in the preferences process as well
 // as in the GNOME Shell process. Some modules are only available or required in one of
 // these processes.
-const Clutter = await importInShellOnly('gi://Clutter');
+const GdkPixbuf = await importInShellOnly('gi://GdkPixbuf');
-const Cogl    = await importInShellOnly('gi://Cogl');
+const Clutter   = await importInShellOnly('gi://Clutter');
+const Cogl      = await importInShellOnly('gi://Cogl');
+const St        = await importInShellOnly('gi://St');
 
 // We import the Config module. This is done differently in the GNOME Shell process and in
 // the preferences process.
@@ -117,6 +119,26 @@ export function getStringResource(path) {
   return new TextDecoder().decode(data.get_data());
 }
 
+// Reads the contents of an image file contained in the global resources archive. The data
+// is returned as a St.ImageContent.
+export function getImageResource(path, premultiplied = false) {
+  const data    = GdkPixbuf.Pixbuf.new_from_resource(path);
+  const texture = St.ImageContent.new_with_preferred_size(data.width, data.height);
+  const format  = data.has_alpha ?
+     (premultiplied ? Cogl.PixelFormat.RGBA_8888_PRE : Cogl.PixelFormat.RGBA_8888) :
+     Cogl.PixelFormat.RGB_888;
+
+  // https://gitlab.gnome.org/GNOME/gnome-shell/-/commit/44b84e458a22046fedb85701ea25ad08ecc0d43f
+  if (shellVersionIsAtLeast(48, 'beta')) {
+    texture.set_data(global.stage.context.get_backend().get_cogl_context(),
+                     data.get_pixels(), format, data.width, data.height, data.rowstride);
+  } else {
+    texture.set_data(data.get_pixels(), format, data.width, data.height, data.rowstride);
+  }
+
+  return texture;
+}
+
 // Executes a command asynchronously and returns the output from 'stdout' on success or
 // throw an error with output from 'stderr' on failure. If given, input will be passed to
 // 'stdin' and cancellable can be used to stop the process before it finishes.

releng/airootfs/usr/share/gnome-shell/extensions/customreboot@nova1545/metadata.json

@@ -6,9 +6,10 @@
   "shell-version": [
     "45",
     "46",
-    "47"
+    "47",
+    "48"
   ],
   "url": "https://github.com/Nova1545/gnome-shell-extension-customreboot",
   "uuid": "customreboot@nova1545",
   "version": 11
-}
+}

releng/airootfs/usr/share/gnome-shell/extensions/dash-to-dock@micxgx.gmail.com/appIcons.js

@@ -1180,7 +1180,7 @@ const DockAppIconMenu = class DockAppIconMenu extends PopupMenu.PopupMenu {
                         favs.removeFavorite(app.get_id());
                     });
                 } else {
-                    const item = this._appendMenuItem(_('Pin to Dock'));
+                    const item = this._appendMenuItem(__('Pin to Dock'));
                     item.connect('activate', () => {
                         const favs = AppFavorites.getAppFavorites();
                         favs.addFavorite(app.get_id());
@@ -1508,11 +1508,9 @@ class DockShowAppsIconMenu extends DockAppIconMenu {
     _rebuildMenu() {
         this.removeAll();
 
-        /* Translators: %s is "Settings", which is automatically translated. You
+        this.addMenuItem(new PopupMenu.PopupSeparatorMenuItem(__('Dash to Dock')));
-           can also translate the full message if this fits better your language. */
-        const name = __('Dash to Dock %s').format(_('Settings'));
-        const item = this._appendMenuItem(name);
 
+        const item = this._appendMenuItem(_('Settings'));
         item.connect('activate', () =>
             Docking.DockManager.extension.openPreferences());
     }

releng/airootfs/usr/share/gnome-shell/extensions/dash-to-dock@micxgx.gmail.com/docking.js

@@ -245,7 +245,7 @@ const DockedDash = GObject.registerClass({
         this._autohideIsEnabled = null;
         this._intellihideIsEnabled = null;
 
-        // This variable marks if Meta.disable_unredirect_for_display() is called
+        // This variable marks if _disableUnredirect() is called
         // to help restore the original state when intelihide is disabled.
         this._unredirectDisabled = false;
 
@@ -669,9 +669,22 @@ const DockedDash = GObject.registerClass({
         ]);
     }
 
+    _disableUnredirect() {
+        if (!this._unredirectDisabled) {
+            if (Meta.disable_unredirect_for_display !== undefined)
+                Meta.disable_unredirect_for_display(global.display);
+            else if (global.compositor.disable_unredirect !== undefined)
+                global.compositor.disable_unredirect();
+            this._unredirectDisabled = true;
+        }
+    }
+
     _restoreUnredirect() {
         if (this._unredirectDisabled) {
-            Meta.enable_unredirect_for_display(global.display);
+            if (Meta.enable_unredirect_for_display !== undefined)
+                Meta.enable_unredirect_for_display(global.display);
+            else if (global.compositor.enable_unredirect !== undefined)
+                global.compositor.enable_unredirect();
             this._unredirectDisabled = false;
         }
     }
@@ -829,10 +842,8 @@ const DockedDash = GObject.registerClass({
     }
 
     _animateIn(time, delay) {
-        if (!this._unredirectDisabled && this._intellihideIsEnabled) {
+        if (this._intellihideIsEnabled)
-            Meta.disable_unredirect_for_display(global.display);
+            this._disableUnredirect();
-            this._unredirectDisabled = true;
-        }
         this._dockState = State.SHOWING;
         this.dash.iconAnimator.start();
         this._delayedHide = false;
@@ -870,10 +881,8 @@ const DockedDash = GObject.registerClass({
             mode: Clutter.AnimationMode.EASE_OUT_QUAD,
             onComplete: () => {
                 this._dockState = State.HIDDEN;
-                if (this._intellihideIsEnabled && this._unredirectDisabled) {
+                if (this._intellihideIsEnabled)
-                    Meta.enable_unredirect_for_display(global.display);
+                    this._restoreUnredirect();
-                    this._unredirectDisabled = false;
-                }
                 // Remove queued barrier removal timeout if any
                 if (this._removeBarrierTimeoutId > 0)
                     GLib.source_remove(this._removeBarrierTimeoutId);
@@ -1256,6 +1265,7 @@ const DockedDash = GObject.registerClass({
             this._ignoreHover = this._oldIgnoreHover;
         this._oldIgnoreHover = null;
         this._box.sync_hover();
+        this._updateDashVisibility();
     }
 
     /**

releng/airootfs/usr/share/gnome-shell/extensions/dash-to-dock@micxgx.gmail.com/metadata.json

@@ -7,9 +7,10 @@
   "shell-version": [
     "45",
     "46",
-    "47"
+    "47",
+    "48"
   ],
   "url": "https://micheleg.github.io/dash-to-dock/",
   "uuid": "dash-to-dock@micxgx.gmail.com",
-  "version": 99
+  "version": 100
 }

releng/airootfs/usr/share/gnome-shell/extensions/dash-to-dock@micxgx.gmail.com/stylesheet.css

@@ -8,7 +8,8 @@
   background-color: rgba(238, 238, 238, 0.2); }
 
 .dash-item-container .overview-tile .app-grid-running-dot {
-  margin-bottom: 8px; }
+  margin-bottom: 8px;
+  offset-y: 2px; }
 
 #dashtodockContainer.bottom #dash {
   margin: 0px;

releng/airootfs/usr/share/gnome-shell/extensions/hide-universal-access@akiirui.github.io/metadata.json

@@ -3,9 +3,9 @@
   "description": "Hide Universal Access icon from the status bar",
   "name": "Hide Universal Access",
   "shell-version": [
-    "47"
+    "48"
   ],
   "url": "https://github.com/akiirui/hide-universal-access",
   "uuid": "hide-universal-access@akiirui.github.io",
-  "version": 18
+  "version": 19
 }

releng/airootfs/usr/share/gnome-shell/extensions/no-overview@fthx/extension.js

@@ -9,15 +9,8 @@ import * as Main from 'resource:///org/gnome/shell/ui/main.js';
 
 export default class NoOverviewExtension {
     enable() {
-        if (!Main.layoutManager._startingUp) {
+        if (Main.layoutManager._startingUp)
-            return;
+            Main.layoutManager.connectObject('startup-complete', () => Main.overview.hide(), this);
-        }
-
-        Main.layoutManager.connectObject(
-            'startup-complete',
-            () => Main.overview.hide(),
-            this
-        );
     }
 
     disable() {

releng/airootfs/usr/share/gnome-shell/extensions/no-overview@fthx/metadata.json

@@ -6,9 +6,9 @@
     "fthx"
   ],
   "shell-version": [
-    "47"
+    "48"
   ],
   "url": "https://github.com/fthx/no-overview",
   "uuid": "no-overview@fthx",
-  "version": 18
+  "version": 19
 }

releng/airootfs/usr/share/gnome-shell/extensions/notification-timeout@chlumskyvaclav.gmail.com/CHANGELOG.md

@@ -1,3 +1,5 @@
+## Version 13
+ * add Gnome 48 support
 ## Version 12
  * add Gnome 47 support
 ## Version 11

releng/airootfs/usr/share/gnome-shell/extensions/notification-timeout@chlumskyvaclav.gmail.com/metadata.json

@@ -8,9 +8,10 @@
   "shell-version": [
     "45",
     "46",
-    "47"
+    "47",
+    "48"
   ],
   "url": "https://github.com/vchlum/notification-timeout",
   "uuid": "notification-timeout@chlumskyvaclav.gmail.com",
-  "version": 12
+  "version": 13
 }

releng/airootfs/usr/share/gnome-shell/extensions/reboottouefi@ubaygd.com/metadata.json

@@ -7,9 +7,10 @@
   "shell-version": [
     "45",
     "46",
-    "47"
+    "47",
+    "48"
   ],
   "url": "https://github.com/UbayGD/reboottouefi",
   "uuid": "reboottouefi@ubaygd.com",
-  "version": 23
+  "version": 24
 }

releng/airootfs/usr/share/gnome-shell/extensions/rounded-window-corners@fxgn/effect/clip_shadow_effect.js

@@ -4,12 +4,13 @@
  * Needed because of this issue:
  * https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/4474
  */
+import Cogl from 'gi://Cogl';
 import GObject from 'gi://GObject';
 import Shell from 'gi://Shell';
 import { readShader } from '../utils/file.js';
 const [declarations, code] = readShader(import.meta.url, 'shader/clip_shadow.frag');
 export const ClipShadowEffect = GObject.registerClass({}, class extends Shell.GLSLEffect {
     vfunc_build_pipeline() {
-        this.add_glsl_snippet(Shell.SnippetHook.FRAGMENT, declarations, code, false);
+        this.add_glsl_snippet(Cogl.SnippetHook.FRAGMENT, declarations, code, false);
     }
 });

releng/airootfs/usr/share/gnome-shell/extensions/rounded-window-corners@fxgn/effect/linear_filter_effect.js

@@ -7,7 +7,7 @@ import GObject from 'gi://GObject';
 import Shell from 'gi://Shell';
 export const LinearFilterEffect = GObject.registerClass({}, class extends Shell.GLSLEffect {
     vfunc_build_pipeline() {
-        this.add_glsl_snippet(Shell.SnippetHook.FRAGMENT, '', '', false);
+        this.add_glsl_snippet(Cogl.SnippetHook.FRAGMENT, '', '', false);
     }
     vfunc_paint_target(node, ctx) {
         this.get_pipeline()?.set_layer_filters(0, Cogl.PipelineFilter.LINEAR_MIPMAP_LINEAR, Cogl.PipelineFilter.LINEAR);

releng/airootfs/usr/share/gnome-shell/extensions/rounded-window-corners@fxgn/effect/rounded_corners_effect.js

@@ -1,5 +1,6 @@
 /** @file Binds the actual corner rounding shader to the windows. */
 var _a;
+import Cogl from 'gi://Cogl';
 import GObject from 'gi://GObject';
 import Shell from 'gi://Shell';
 import { readShader } from '../utils/file.js';
@@ -31,7 +32,7 @@ export const RoundedCornersEffect = GObject.registerClass({}, class Effect exten
         }
     }
     vfunc_build_pipeline() {
-        this.add_glsl_snippet(Shell.SnippetHook.FRAGMENT, declarations, code, false);
+        this.add_glsl_snippet(Cogl.SnippetHook.FRAGMENT, declarations, code, false);
     }
     /**
      * Update uniforms of the shader.
@@ -43,7 +44,7 @@ export const RoundedCornersEffect = GObject.registerClass({}, class Effect exten
      */
     updateUniforms(scaleFactor, config, windowBounds) {
         const borderWidth = getPref('border-width') * scaleFactor;
-        const borderColor = getPref('border-color');
+        const borderColor = config.borderColor;
         const outerRadius = config.borderRadius * scaleFactor;
         const { padding, smoothing } = config;
         const bounds = [

releng/airootfs/usr/share/gnome-shell/extensions/rounded-window-corners@fxgn/extension.js

@@ -1,4 +1,4 @@
-import { Extension } from 'resource:///org/gnome/shell/extensions/extension.js';
+import { Extension, InjectionManager, } from 'resource:///org/gnome/shell/extensions/extension.js';
 import { layoutManager } from 'resource:///org/gnome/shell/ui/main.js';
 import { WindowPreview } from 'resource:///org/gnome/shell/ui/windowPreview.js';
 import { WorkspaceAnimationController } from 'resource:///org/gnome/shell/ui/workspaceAnimation.js';
@@ -11,17 +11,17 @@ import { getPref, initPrefs, prefs, uninitPrefs } from './utils/settings.js';
 import { WindowPicker } from './window_picker/service.js';
 export default class RoundedWindowCornersReborn extends Extension {
     // The extension works by overriding (monkey patching) the code of GNOME
-    // Shell's internal methods. We need to keep a reference to the original
+    // Shell's internal methods. InjectionManager is a convenience class that
-    // methods so that we can restore them when the extension is disabled.
+    // stores references to the original methods and allows to easily restore
-    #originalAddWindow = WindowPreview.prototype._addWindow;
+    // them when the extension is disabled.
-    #originalPrepareWorkspaceSwitch = WorkspaceAnimationController.prototype._prepareWorkspaceSwitch;
+    #injectionManager = null;
-    #originalFinishWorkspaceSwitch = WorkspaceAnimationController.prototype._finishWorkspaceSwitch;
     #windowPicker = null;
     #layoutManagerStartupConnection = null;
     #workspaceSwitchConnections = null;
     enable() {
         // Initialize extension preferences
         initPrefs(this.getSettings());
+        this.#injectionManager = new InjectionManager();
         // Export the d-bus interface of the window picker in preferences.
         // See the readme in the `window_picker` directory for more information.
         this.#windowPicker = new WindowPicker();
@@ -51,26 +51,22 @@ export default class RoundedWindowCornersReborn extends Extension {
         // We need to override its `_addWindow` method to add a shadow actor
         // to the preview, otherwise overview windows won't have custom
         // shadows.
-        WindowPreview.prototype._addWindow = function (window) {
+        this.#injectionManager.overrideMethod(WindowPreview.prototype, '_addWindow', addWindow => function (window) {
-            self.#originalAddWindow.apply(this, [window]);
+            addWindow.call(this, window);
             addShadowInOverview(window, this);
-        };
+        });
         // The same way we applied a cloned shadow actor to window previews in
         // the overview, we also need to apply it to windows during workspace
         // switching.
-        WorkspaceAnimationController.prototype._prepareWorkspaceSwitch =
+        this.#injectionManager.overrideMethod(WorkspaceAnimationController.prototype, '_prepareWorkspaceSwitch', prepareWorkspaceSwitch => function (workspaceIndices) {
-            function (workspaceIndices) {
+            prepareWorkspaceSwitch.call(this, workspaceIndices);
-                self.#originalPrepareWorkspaceSwitch.apply(this, [
+            self.#workspaceSwitchConnections =
-                    workspaceIndices,
+                addShadowsInWorkspaceSwitch(this);
-                ]);
+        });
-                self.#workspaceSwitchConnections =
+        this.#injectionManager.overrideMethod(WorkspaceAnimationController.prototype, '_finishWorkspaceSwitch', finishWorkspaceSwitch => function (switchData) {
-                    addShadowsInWorkspaceSwitch(this);
+            removeShadowsAfterWorkspaceSwitch(this);
-            };
+            finishWorkspaceSwitch.call(this, switchData);
-        WorkspaceAnimationController.prototype._finishWorkspaceSwitch =
+        });
-            function (switchData) {
-                removeShadowsAfterWorkspaceSwitch(this);
-                self.#originalFinishWorkspaceSwitch.apply(this, [switchData]);
-            };
         // Watch for changes of the `enable-preferences-entry` prefs key.
         prefs.connect('changed', (_, key) => {
             if (key === 'enable-preferences-entry') {
@@ -83,11 +79,8 @@ export default class RoundedWindowCornersReborn extends Extension {
     }
     disable() {
         // Restore patched methods
-        WindowPreview.prototype._addWindow = this.#originalAddWindow;
+        this.#injectionManager?.clear();
-        WorkspaceAnimationController.prototype._prepareWorkspaceSwitch =
+        this.#injectionManager = null;
-            this.#originalPrepareWorkspaceSwitch;
-        WorkspaceAnimationController.prototype._finishWorkspaceSwitch =
-            this.#originalFinishWorkspaceSwitch;
         // Remove the item to open preferences page in background menu
         disableBackgroundMenuItem();
         this.#windowPicker?.unexport();

releng/airootfs/usr/share/gnome-shell/extensions/rounded-window-corners@fxgn/manager/event_handlers.js

@@ -118,7 +118,6 @@ export function onSettingsChanged(key) {
             break;
         case 'global-rounded-corner-settings':
         case 'custom-rounded-corner-settings':
-        case 'border-color':
         case 'border-width':
         case 'tweak-kitty-terminal':
             refreshAllRoundedCorners();

releng/airootfs/usr/share/gnome-shell/extensions/rounded-window-corners@fxgn/metadata.json

@@ -6,9 +6,10 @@
   "settings-schema": "org.gnome.shell.extensions.rounded-window-corners-reborn",
   "shell-version": [
     "46",
-    "47"
+    "47",
+    "48"
   ],
   "url": "https://github.com/flexagoon/rounded-window-corners",
   "uuid": "rounded-window-corners@fxgn",
-  "version": 11
+  "version": 12
 }

releng/airootfs/usr/share/gnome-shell/extensions/rounded-window-corners@fxgn/preferences/pages/custom.js

@@ -6,6 +6,7 @@
 import Adw from 'gi://Adw';
 import GLib from 'gi://GLib';
 import GObject from 'gi://GObject';
+import Gdk from 'gi://Gdk';
 import { gettext as _ } from 'resource:///org/gnome/Shell/Extensions/js/extensions/prefs.js';
 import { getPref, setPref } from '../../utils/settings.js';
 import { CustomSettingsRow, CustomSettingsRowClass, } from '../widgets/custom_settings_row.js';
@@ -96,6 +97,20 @@ export const CustomPage = GObject.registerClass({
             this.#customWindowSettings[wmClass].enabled = row.get_active();
             setPref('custom-rounded-corner-settings', this.#customWindowSettings);
         });
+        const color = new Gdk.RGBA();
+        [color.red, color.green, color.blue, color.alpha] =
+            this.#customWindowSettings[wmClass].borderColor;
+        r.borderColorButton.set_rgba(color);
+        r.borderColorButton.connect('notify::rgba', (_button) => {
+            const color = r.borderColorButton.get_rgba();
+            this.#customWindowSettings[wmClass].borderColor = [
+                color.red,
+                color.green,
+                color.blue,
+                color.alpha,
+            ];
+            setPref('custom-rounded-corner-settings', this.#customWindowSettings);
+        });
         r.cornerRadius.set_value(this.#customWindowSettings[wmClass].borderRadius);
         r.cornerRadius.connect('value-changed', (adj) => {
             this.#customWindowSettings[wmClass].borderRadius =

releng/airootfs/usr/share/gnome-shell/extensions/rounded-window-corners@fxgn/preferences/pages/general.js

@@ -40,16 +40,17 @@ export const GeneralPage = GObject.registerClass({
         bindPref('border-width', this._borderWidth, 'value', Gio.SettingsBindFlags.DEFAULT);
         const color = new Gdk.RGBA();
         [color.red, color.green, color.blue, color.alpha] =
-            getPref('border-color');
+            this.#settings.borderColor;
         this._borderColor.set_rgba(color);
         this._borderColor.connect('notify::rgba', (button) => {
             const color = button.get_rgba();
-            setPref('border-color', [
+            this.#settings.borderColor = [
                 color.red,
                 color.green,
                 color.blue,
                 color.alpha,
-            ]);
+            ];
+            this.#updateGlobalConfig();
         });
         this._cornerRadius.set_value(this.#settings.borderRadius);
         this._cornerRadius.connect('value-changed', (adj) => {